Panasonic AJ-SD930BE 사용자 가이드
37 (E)
Setup menus
The underlined items indicates the initial setting.
USER menu
<OPERATION>
No./Item
Description
100
SEARCH ENA
This selects the direct search dial operation.
0000
DIAL :
For direct search dial operations.
0001
KEY :
Operation is not transferred to the search
mode unless the search button is pressed.
mode unless the search button is pressed.
101
SHTL MAX
This sets the maximum speed for shuttle
operations.
operations.
0000
a
8.4 : 8.4a normal speed
0001
a
16 : 16a normal speed
0002
a
32 : 32a normal speed
102
FF. REW MAX
This sets the maximum speed for FF and
REW operations.
REW operations.
0000
a
16 : 16 (32)a normal speed
0001
a
32 : 32 (60)a normal speed
0002
a
50 : 50 (100)a normal speed
<Notes>
O
The speeds given in the parentheses apply in
the DVCPRO (25 Mbps), DV and DVCAM
mode.
the DVCPRO (25 Mbps), DV and DVCAM
mode.
O
With mini DV or mini DVCAM cassette, the
maximum speed is set to 32a regardless of
this item’s settings.
maximum speed is set to 32a regardless of
this item’s settings.
104
REF ALARM
This selects whether to warn the operator
when the REF. VIDEO signal has not been
connected.
when the REF. VIDEO signal has not been
connected.
0000
OFF : Warning is not given.
0001
ON : Warning is given by the flashing
STOP lamp.
<Note>
Video and audio output may be disturbed when
the reference video signal is not input, so it is
recommended that a system which inputs the
reference video signal be used.
Video and audio output may be disturbed when
the reference video signal is not input, so it is
recommended that a system which inputs the
reference video signal be used.
105
AUTO EE SEL
This selects the VTR mode in which the EE
status is established when the MODE switch
is set to EE.
status is established when the MODE switch
is set to EE.
0000
S/F/R : EE status is established in
STOP, FF, REW and EJECT modes.
0001
STOP : EE status is established in STOP
and EJECT modes.
0002 BLACK : EE status is established in STOP
and EJECT modes.
However, if the MODE switch is set to TAPE,
the picture becomes black and the sound is
muted when the tape is ejected.
However, if the MODE switch is set to TAPE,
the picture becomes black and the sound is
muted when the tape is ejected.
0003 BLACK1 : EE status is established in
STOP, FF, REW and EJECT modes.
However, if the MODE switch is set to TAPE,
the picture becomes black and the sound is
muted when the tape is ejected.
However, if the MODE switch is set to TAPE,
the picture becomes black and the sound is
muted when the tape is ejected.
0004
GRAY : EE status is established in STOP
and EJECT modes.
However, if the MODE switch is set to TAPE,
the picture becomes gray and the sound is
muted when the tape is ejected.
However, if the MODE switch is set to TAPE,
the picture becomes gray and the sound is
muted when the tape is ejected.
0005
GRAY1 : EE status is established in
STOP, FF, REW and EJECT modes.
However, if the MODE switch is set to TAPE,
the picture becomes gray and the sound is
muted when the tape is ejected.
However, if the MODE switch is set to TAPE,
the picture becomes gray and the sound is
muted when the tape is ejected.
106
EE MODE SEL
This selects the EE mode output signals.
0000 NORMAL :
Signals are output with a delay equivalent to
the length of internal signal processing.
the length of internal signal processing.
0001
THRU :
Signals are output directly, without internal
processing, and so are output with no delay.
processing, and so are output with no delay.
<Note>
When the unit is in edit mode and SDTI/1394 or
SG has been selected for the input signals by the
INPUT SELECT button, internal operations are
forcibly set to NORMAL.
When the unit is in edit mode and SDTI/1394 or
SG has been selected for the input signals by the
INPUT SELECT button, internal operations are
forcibly set to NORMAL.
108
CAP. LOCK
This selects the CAPSTAN LOCK mode.
[625i system]
0000
2F : 2F mode
0001
4F : 4F mode
0002
8F : 8F mode
[525i system]
0000
2F : 2F mode
0001
4F : 4F mode
SD955B
107
PLAY DELAY
This set the play delay time in frame
increments.
increments.
0000
0
:
:
0015
15
No./Item
Description