Panasonic AJ-SD930BE 사용자 가이드
42 (E)
Setup menus
The underlined items indicates the initial setting.
USER menu
<EDIT>
No./Item
Description
320
VAR FWD
MAX
MAX
This sets the maximum SLOW FWD speed.
0000
+4.1 : +4.1 (+3.1)a speed
0001
+1.85 : +1.85a speed
0002
+1 : +1a speed
<Notes>
O
The value for the DV/DVCAM tape is shown in
parenthesis ( ).
parenthesis ( ).
O
At any speed setting other than +4.1, the
phase cannot be synchronized from the editing
controller.
phase cannot be synchronized from the editing
controller.
323
JOG FWD
MAX
MAX
This sets the maximum JOG FWD speed.
0000
+4.1 : +4.1 (+3.1)a speed
0001
+1.85 : +1.85a speed
0002
+1 : +1a speed
<Notes>
O
The value for the DV/DVCAM tape is shown in
parenthesis ( ).
parenthesis ( ).
O
The maximum speed is set to +1a when the
dial on the front panel is operated.
dial on the front panel is operated.
O
At any speed setting other than +4.1, the
phase cannot be synchronized from an editing
controller which synchronizes the phase using
the JOG command.
phase cannot be synchronized from an editing
controller which synchronizes the phase using
the JOG command.
324
JOG REV MAX
This sets the maximum JOG REV speed.
0000
–4.1 : –4.1 (–3.1)a speed
0001
–1.85 : –1.85a speed
0002
–1 : –1a speed
0003
–0.43 : –0.43 (–0.5)a speed
<Notes>
O
The value for the DV/DVCAM tape is shown in
parenthesis ( ).
parenthesis ( ).
O
The maximum speed is set to –1a when the
dial on the front panel is operated.
dial on the front panel is operated.
325
POSTROLL
TM
TM
SD955B
This sets the postroll time.
Any time from 0 to 5 seconds can be set in 1-
second units.
Any time from 0 to 5 seconds can be set in 1-
second units.
0000
0s
0001
1s
0002
2s
0003
3s
0004
4s
0005
5s
321
VAR REV MAX
This sets the maximum SLOW REV speed.
0000
–4.1 : –4.1 (–3.1)a speed
0001
–1.85 : –1.85a speed
0002
–1 : –1a speed
0003
–0.43 : –0.43a speed
<Note>
The value for the DV/DVCAM tape is shown in
parenthesis ( ).
The value for the DV/DVCAM tape is shown in
parenthesis ( ).
No./Item
Description
309
EDIT RPLCEC
The same type of setting as setup menu No.
305. This selects the channel concerned when
the CUE edit preset is set in compliance with
the ON or OFF presetting for the analogue
audio signals designated by the controller.
305. This selects the channel concerned when
the CUE edit preset is set in compliance with
the ON or OFF presetting for the analogue
audio signals designated by the controller.
0000
N-DEF :
Not set.
0001
CH1 :
Compliance with analogue CH1 edit preset.
0002
CH2 :
Compliance with analogue CH2 edit preset.
0003
CH1+2 :
Compliance with either analogue CH1 or CH2
edit preset.
edit preset.
310
CONFI EDIT
This selects whether to conduct simultaneous
playback while editing is in progress.
playback while editing is in progress.
0000
OFF : No simultaneous playback
0001
ON : Simultaneous playback
<Note>
Simultaneous playback is valid when the MODE
switch is set to TAPE.
Simultaneous playback is valid when the MODE
switch is set to TAPE.
311
AUD EDIT IN
This selects the connection method for the
digital audio edit IN point.
digital audio edit IN point.
0000
CUT : Cut processing
0001
FADE : V Fade processing
312
AUD EDIT
OUT
OUT
This selects the connection method for the
digital audio edit OUT point.
digital audio edit OUT point.
0000
CUT : Cut processing
0001
FADE : V Fade processing
313
AUTO ENTRY
SD955B
This selects whether the IN point is to be
entered using the PREROLL button when it
has not been entered.
entered using the PREROLL button when it
has not been entered.
0000
DIS : IN point is not entered.
0001
ENA : IN point is entered.
314
CF ADJ SEL
SD955B
This selects the CF adjustment deck with
deck-to-deck editing.
deck-to-deck editing.
0000 PLAYER :
The player’s edit IN/OUT points are adjusted.
(reference as the RECORDER side)
(reference as the RECORDER side)
0001 RECORD :
The recorder’s edit IN/OUT points are
adjusted. (reference as the PLAYER side)
adjusted. (reference as the PLAYER side)
315
AFTER
CUE-UP
CUE-UP
This selects the mode after cue-up operation
is complete.
is complete.
0000
STOP : STOP mode
0001
STILL : SHTL STILL mode
0002
STILL2 : SLOW STILL mode