JVC KD-R218 사용자 설명서

다운로드
페이지 62
4
Troubleshooting 
Symptom
Remedy/Cause
General
Sound cannot be heard from the 
speakers.
• Adjust the volume to the optimum level.
• Make sure the unit is not muted/paused.
• Check the cords and connections.
“PROTECT” appears on the display and 
no operations can be done.
Check to be sure the terminals of the speaker leads are 
covered with insulating tape properly, then reset the unit.
If “PROTECT” does not disappear, consult your JVC car audio 
dealer or a company supplying kits.
This unit does not work at all.
Reset the unit. (See page 1.)
“AUX IN” cannot be selected.
Check the <SRC SELECT> 
= <AUX IN> setting. (See “Menu 
operations” on page 3.)
FM/AM
SSM automatic presetting does not 
work.
Store stations manually.
Static noise while listening to the radio. Connect the antenna firmly.
“AM” cannot be selected.
Check the <SRC SELECT> 
= <AM> setting. (See “Menu 
operations” on page 3.)
Disc playback
Disc cannot be played back.
Insert the disc correctly.
• CD-R/CD-RW cannot be played back.
• Tracks on the CD-R/CD-RW cannot be 
skipped.
• Insert a finalized CD-R/CD-RW.
• Finalize the CD-R/CD-RW with the component which you 
used for recording.
Disc can be neither played back nor 
ejected.
• Unlock the disc.
• Eject the disc forcibly.
Disc sound is sometimes interrupted.
• Stop playback while driving on rough roads.
• Change the disc.
• Check the cords and connections.
“NO DISC” appears on the display.
Insert a playable disc into the loading slot.
“PLEASE” and “EJECT” appear 
alternately on the display.
Press 
0, then insert a disc correctly.
MP3/WMA playback
Disc cannot be played back.
• Use a disc with MP3/WMA tracks recorded in a format 
compliant with ISO 9660 Level 1, Level 2, Romeo, or Joliet.
• Add the extension code <.mp3> or <.wma> to the file 
names.
Noise is generated.
Skip to another track or change the disc. (Do not add the 
extension code <.mp3> or <.wma> to non-MP3 or WMA 
tracks.)
A longer readout time is required 
(“READING” keeps flashing on the 
display).
Do not use too many hierarchical levels and folders. 
Tracks are not played back in the order 
you have intended.
Playback order is determined when the files are recorded.
The elapsed playing time is not correct. This sometimes occurs during playback. This is caused by 
how the tracks are recorded on the disc.
The correct characters are not 
displayed (e.g. album name).
This unit can only display letters (upper case), numbers, and 
a limited number of symbols.
Installation/connection
The fuse blows.
Connect the red and black leads correctly.
Power cannot be turned on.
Check to make sure the yellow lead is connected.
No sound from the speakers.
Check to make sure the speaker output lead is not 
shortcircuited.
Sound is distorted.
• Check to make sure the speaker output lead is grounded.
• Check to make sure the “–” terminals of L and R speakers 
are grounded in common.
Noise interfere with sounds.
Check to make sure the rear ground terminal connected to 
the car’s chassis is using shorter and thicker cords.
This unit becomes hot.
• Check to make sure the speaker output lead is grounded.
• Check to make sure the “–” terminals of L and R speakers 
are grounded in common.
This unit does not work at all.
Reset the unit. (See page 1.)
• CD-RWs may require a longer readout time since 
the reflectance of CD-RWs is lower than that of 
regular CDs.
Playing an MP3/WMA disc
• This unit can play back MP3/WMA files with the 
extension code <.mp3> or <.wma> (regardless of 
the letter case—upper/lower).
• This unit can show the names of albums, artists 
(performer), and tag (Version 1.0, 1.1, 2.2, 2.3, or 2.4) 
for MP3 files and for WMA files.
• This unit can display only one-byte characters. No 
other characters can be correctly displayed.
• This unit can play back MP3/WMA files meeting the 
conditions below:
  – Bit rate: 8 kbps — 320 kbps
 – 
Sampling frequency: 
    48 kHz, 44.1 kHz, 32 kHz (for MPEG-1)
    24 kHz, 22.05 kHz, 16 kHz (for MPEG-2)
  – Disc format: ISO 9660 Level 1/ Level 2, Romeo, 
Joliet, Windows long file name
• The maximum number of characters for file/folder 
names vary depending on the disc format used 
(includes 4 extension characters—<.mp3> or 
<.wma>).
  – ISO 9660 Level 1: up to 12 characters; ISO 9660 
Level 2: up to 31 characters; Romeo: up to 128 
characters; Joliet: up to 64 characters; Windows 
long file name: up to 128 characters
• This unit can recognize a total of 512 files, 255 
folders, and 8 hierarchical levels.
• This unit can play back files recorded in VBR 
(variable bit rate).
  Files recorded in VBR have a discrepancy in the 
elapsed time display, and do not show the actual 
elapsed time. In particular, this difference becomes 
noticeable after performing the search function.
• This unit cannot play back the following files:
  – MP3 files: encoded in MP3i and MP3 PRO format; 
an inappropriate format; layer 1/2.
  – WMA files: encoded in lossless, professional, and 
voice format; not based upon Windows Media® 
Audio; copy-protected with DRM.
  – Files which have data such as AIFF, ATRAC3, etc.
• The search function works but search speed is not 
constant.
Microsoft and Windows Media are either registered 
trademarks or trademarks of Microsoft Corporation 
in the United States and/or other countries.
Basic operations
• If you turn off the power while listening to a track, 
playback will start from where it had been stopped 
previously next time you turn on the power.
• If no operation is done for about 60 seconds 
after pressing MENU button, the operation will be 
canceled.
Tuner operations
• During SSM search...
  – All previously stored stations are erased and the 
stations are stored anew.
  – When SSM is over, the station stored in the lowest 
preset number will be automatically tuned in.
• If you try to assign titles to more than 30 station 
frequencies, “NAME FULL” appears. Delete 
unwanted titles before assignment.
Disc operations
Caution for DualDisc playback
• The Non-DVD side of a “DualDisc” does not comply 
with the “Compact Disc Digital Audio” standard. 
Therefore, the use of Non-DVD side of a DualDisc 
on this product may not be recommended.
General
• This unit has been designed to reproduce CDs/
CD Texts, and CD-Rs (Recordable)/CD-RWs 
(Rewritable) in audio CD (CD-DA) and MP3/WMA 
formats.
• If you change the source while listening to a disc, 
playback stops. Next time you select “CD” as the 
playback source, playback will start from where it 
had been stopped previously.
• If the ejected disc is not removed within 
15 seconds, the disc is automatically inserted again 
into the loading slot to protect it from dust.
Playing a CD-R or CD-RW
• Use only “finalized” CD-Rs or CD-RWs.
•  This unit can play back multi-session discs; however, 
unclosed sessions will be skipped while playing.
• Some CD-Rs or CD-RWs may not be played back on 
this unit:
  – Discs are dirty or scratched.
  – Moisture condensation has occurred on the lens 
inside the unit.
  – The pickup lens inside the unit is dirty.
  – The files on the CD-R/CD-RW are written using the 
“Packet Write” method.
  – There are improper recording conditions (missing 
data, etc.) or media conditions (stained, scratched, 
warped, etc.).
More about this unit 
AUDIO AMPLIFIER SECTION
Power Output:
  20 W RMS × 4 Channels at 4 Ω and 
≤ 1% THD+N
Signal-to-Noise Ratio:
  80 dBA (reference: 1 W into 4 Ω)
Load Impedance: 
4 Ω (4 Ω to 8 Ω allowance)
Tone Control Range:
 
Bass: 
±12 dB (60 Hz, 80 Hz, 100 Hz, 200 Hz)
 
 
Q1.0, Q1.25, Q1.5, Q2.0
 
Middle:  ±12 dB (0.5 kHz, 1.0 kHz, 1.5 kHz, 
2.5 kHz)
 
 
Q0.75, Q1.0, Q1.25
 
Treble:  ±12 dB (10.0 kHz, 12.5 kHz, 15.0 kHz, 
17.5 kHz)
  
(Fixed)
Frequency Response:  40 Hz to 20 000 Hz
Line-Out Level/Impedance:
2.5 V/20 kΩ load (full scale)
Subwoofer-Out Level/Impedance:
2.5 V/20 kΩ load (full scale)
Output Impedance: 
1 kΩ
Other Terminal: 
AUX (auxiliary) input jack
TUNER SECTION
Frequency Range:
 
FM: 
87.5 MHz to 107.9 MHz
 
 
(with channel interval set to 100 kHz or 
200 kHz)
 
 
87.5 MHz to 108.0 MHz
 
 
(with channel interval set to 50 kHz)
 
AM:  530 kHz to 1 710 kHz
 
 
(with channel interval set to 10 kHz)
 
 
531 kHz to 1 602 kHz
 
 
(with channel interval set to 9 kHz)
[FM Tuner]
Usable Sensitivity: 9.3 dBf (0.8 μV/75 Ω)
50 dB Quieting Sensitivity: 16.3 dBf (1.8 μV/75 Ω)
Alternate Channel Selectivity (400 kHz): 65 dB
Frequency Response: 40 Hz to 15 000 Hz
Stereo Separation: 40 dB
[AM Tuner]
Sensitivity/Selectivity: 20 μV/40 dB
CD PLAYER SECTION
Type: 
Compact disc player
Signal Detection System: Non-contact optical pickup 
(semiconductor laser)
Number of channels: 
2 channels (stereo)
Frequency Response: 
5 Hz to 20 000 Hz
Dynamic Range: 
93 dB
Signal-to-Noise Ratio: 
98 dB
Wow and Flutter: 
Less than measurable limit
MP3 Decoding Format:  MPEG1/2 Audio Layer 3
 
Max. Bit Rate: 320 kbps
WMA (Windows Media® Audio) Decoding Format:
 
Max. Bit Rate: 192 kbps
GENERAL
Power Requirement: 
Operating Voltage: 
DC 14.4 V (11 V to 16 V 
allowance)
Grounding System: 
Negative ground
Allowable Operating Temperature:
 
0°C to +40°C (32°F to 104°F)
Dimensions (W × H × D):
 
Installation Size (approx.):
 
 
182 mm × 52 mm × 160 mm
 
 
(7-3/16” × 2-1/16” × 6-5/16”)
 
Panel Size (approx.):
 
 
188 mm × 58 mm × 6 mm
 
 
(7-7/16” × 2-5/16” × 1/4”)
Mass (approx.): 
1.3 k
g (2.9 lbs) (excluding 
accessories)
Design and specifications are subject to change 
without notice.
If a kit is necessary for your car, consult your 
telephone directory for the nearest car audio 
speciality shop.
To play new discs
Remove any rough areas from the 
inner and outer edges of the disc.
Do not use the following discs:
• Single CD—8 cm (3-3/16”) disc
• Warped disc
• Disc with sticker and sticker residue
• Disc with stick-on label
• Unusual shape disc
• C-thru Disc (semi-transparent disc)
• Disc with transparent or semi-transparent parts on 
its recording area
How to clean the connectors
Wipe the connectors with 
a cotton swab or cloth 
moistened with alcohol.
Moisture condensation
Moisture may condense on the lens inside the unit. 
Eject the disc and leave the unit turned on for a few 
hours until the moisture has evaporated.
To keep discs clean
Wipe in a straight line from center 
of disc to edge. Do not use liquid 
cleaners, thinners, or benzene.
Maintenance 
Having TROUBLE with operation?
Please reset your unit
Still having trouble??
Call 1-800-252-5722 (USA ONLY)
http://www.jvc.com
Specifications 
Connectors
EN_KD-R218[J]f.indd   4
EN_KD-R218[J]f.indd   4
10/21/09   5:28:37 PM
10/21/09   5:28:37 PM