Regency U32S-LP5 사용자 설명서

U32S-5 FPI Direct Vent Gas Insert

1)  Turn the unit off and allow it to cool down to room temperature.

2)  Disconnect the power source and turn off the gas supply to the
 insert.

3)  Open the bottom louver.

4)  Remove the door frame by lifting out from the bottom and lift up off 

the glass door.

5)  Remove the glass door.

 

a)  Remove the 2 hooks shown below at the bottom of the glass  
 

     door

. 

Swing the door out 45

o

 from the bottom and lift up and  

 

      out.

6)  Remove the burner by undoing the 2 screws shown. Carefully  slide 

the burner to the left.  Then lift the burner up and out ensuring not to 
spill glass crystals.

7)  Carefully set aside the burner and glass crystals.

8)  Remove the base cover by lifting up from the back and maneover 

out.

9)  Disconnect the ON/OFF connector wires from the valve.

 

NOTE: For LP units disconnect the DC Sparker ignitor wire from the 
valve.