Hitachi VM-H835LA 사용자 설명서

Simple Programmable Edit (Edit remote control is optional accessory) 

 

59

  PROG.  1  0: 00 : 02 
    IN        - : - - : - -  
   OUT       - : - - : - -  

Note: If your VCR is connected to a TV, the program display will also appear on the TV 
screen. 

5. Press the   button and use the 

 or 

 button to search for the starting point of the 

segment you want to copy. Press   and then 

 to set the camcorder to the play pause 

mode. 
The linear time counter counts when searching for the starting point. 
Use the FORWARD and REVERSE buttons in the play or pause mode to fine adjust the 
tape position. Press FORWARD and hold it; the tape is played while the button is held. 
Press REVERSE and hold it for reverse play. 
6. Press the IN button to store the counter reading. When you press the IN button, OUT 
flashes in the program display. 

 
 
 
 
 
 
  PROG.  1  0: 15 : 13 
    IN        0: 15 : 13  
   OUT       - : - - : - -  

7. Press the 

 button to search for the end of the segment you want to copy. Press   

and then 

 to set the camcorder to the play pause mode. Use the FORWARD or 

REVERSE button as required to fine adjust the tape position. 
8. Press the OUT button to store the counter reading at the end of the scene. 

 
 
 
 
 
 
  PROG.  2  0: 20 : 15 
    IN        - : - - : - -  
   OUT       - : - - : - -  

9. Continue programming as described above until you have entered up to four different 
segments. 
10. Load a blank tape, then set the VCR to the record pause mode. 

11. Point the remote control at the receiver on the VCR and press the COPY START 
button to start simple programmable edit. 
• The camcorder automatically searches for the beginning of the first segment and starts 
playback. The recording VCR automatically starts recording 
• After recording the first segment, the camcorder automatically searches for the