Panasonic AG-3DP1G 사용자 설명서
1
Chapter
P
ar
ts
ts
and
their
Functions
Chapter 2
Parts and Their Functions
Power Supply and Accessory Mounting Section
9
1 13
4 5
14 11 3 2
10
12
11 8 7
6
1 POWER switch
Use to turn the power on and off.
2 Battery holder
An Anton/Bauer battery is mounted here.
For details, refer to [Mounting the Battery and Setting
the Battery Type] (page 84).
For details, refer to [Mounting the Battery and Setting
the Battery Type] (page 84).
3 Battery release lever
Pull down the release lever to release the battery.
4 DC IN (external power input) socket (XLR, 4P)
Connect this camera to an external DC power supply.
For details, refer to [Use of the External DC Power
Supply] (page 85).
For details, refer to [Use of the External DC Power
Supply] (page 85).
5 DC OUT (DC power supply) output socket
This is a 12 V DC output socket that provides a
maximum current of 1.5 A.
maximum current of 1.5 A.
NOTE
Be sure to check polarity before connecting an external
device as incorrect connection could lead to damage.
device as incorrect connection could lead to damage.
6 VF connector (20-pin)
Installs the viewfinder (AJ-CVF100G/AJ-HVF21KG,
optional).
Refer to [Viewfinder] (page 27).
optional).
Refer to [Viewfinder] (page 27).
7 Viewfinder left-right positioning ring
8 Light shoe
A video light or similar accessory can be attached here.
(Size of holes for securing screws)
• 1/4-20UNC (6 mm or shorter screws)
(Size of holes for securing screws)
• 1/4-20UNC (6 mm or shorter screws)
9 Light switch
Use to select how to turn on/off the video light
connected to the Light connector.
connected to the Light connector.
AUTO:
Keep the POWER switch on the video light
ON, so that the video light turns on when the
camera starts recording and turns off when
the camera stops recording.
MANUAL:
The video light is turned on/off with the
POWER switch of the light.
10 Light connector
You can connect an Anton/Bauer Ultralight 2 or
equivalent product under 50 W for the video light.
When the light is lit, the battery charge level goes down
sharply. When using the light, we recommend using a
battery above 90 Wh.
equivalent product under 50 W for the video light.
When the light is lit, the battery charge level goes down
sharply. When using the light, we recommend using a
battery above 90 Wh.
11 Shoulder strap fittings
The shoulder strap is attached here.
For details, refer to [Attaching the Shoulder Strap]
(page 89).
For details, refer to [Attaching the Shoulder Strap]
(page 89).
12 Microphone cable clamp
This clamp secures the microphone cables.
13 Tripod mount
To mount the camera on a tripod, attach the optional
tripod adapter (SHAN-TM700) here.
For details, refer to [Mounting the Camera on a Tripod]
(page 89).
tripod adapter (SHAN-TM700) here.
For details, refer to [Mounting the Camera on a Tripod]
(page 89).
14 Accessory mounting hole
Accessories can be attached here. Do not use this hole
for purposes other than attaching accessories.
(Size of holes for securing screws)
• 1/4-20UNC (10 mm or shorter screws)
• 3/8-16UNC (10 mm or shorter screws)
for purposes other than attaching accessories.
(Size of holes for securing screws)
• 1/4-20UNC (10 mm or shorter screws)
• 3/8-16UNC (10 mm or shorter screws)