Panasonic VDR-D310 사용자 설명서

다운로드
페이지 156
Before using
27
LSQT1145
∫ How to hold a disc or card
Do not touch the recording/playback surface or the 
terminal surface.
∫ When inserting/removing a disc
Do not allow the recording/playback side of the disc to get dirty and avoid fingerprints.
≥ If there is a scratch or dirt (e.g. dust or fingerprints) on the recording/playback side of the disc, images 
cannot be recorded or played back normally and the following phenomena may occur:
jRecording or playback becomes impossible.
jPlayback image stops momentarily or sound is interrupted during playback.
jBlock noise appears on playback images.
jThe message “PLEASE CHECK FOR SCRATCHES OR STAINS ON DISC.” appears.
∫ If there is dirt or condensation on the disc
Wipe with a damp cloth and then wipe dry.
∫ Handling precautions
≥ Be careful about scratches and dirt.
≥ Do not attach labels or stickers to discs. 
(This may cause disc warping and un-balanced rotation, rendering it unusable.)
≥ Write on the label side of the disc only with a soft, oil-based felt pen. Do not use ballpoint pens or 
other hard writing implements.
≥ Do not use record cleaning sprays, benzine, thinner, static electricity prevention liquids or any other 
solvent.
≥ Do not use scratch-proof protectors or covers.
≥ Do not drop, stack, or impact discs. Do not place objects on them.
≥ Do not use the following discs:
jDiscs with exposed adhesive from removed stickers or labels.
jDiscs that are badly warped or cracked.
jIrregularly shaped discs, such as heart shapes.
≥ Do not expose the terminals of the card to water, garbage or dust.
≥ Do not place in the following areas:
jIn direct sunlight.
jIn very dusty or humid areas.
jNear a heater.
jLocations susceptible to significant difference in temperature (condensation can occur).
jWhere static electricity or electromagnetic waves occur.
≥ Put discs and cards back in their cases for protection when not using them.
Disc and card handling
LSQT1145.book  27 ページ  2006年12月28日 木曜日 午前9時34分