Panasonic VDR-D300 사용자 설명서
110
LSQT1011
W
it
h
o
the
r
pr
oduc
ts
With a printer (PictBridge)
6 Select the date print setting on [
DATE PRINT].
≥ If the printer is not capable of date printing, this setting is unavailable.
7 Select the paper size setting on [
PAPER SIZE].
≥ You cannot set paper sizes not supported on the printer.
8 Select the layout setting on [
PAGE LAYOUT].
≥ You cannot set page layouts not supported on the printer.
9 Select [
PRINT]
# [YES] and press the joystick.
The pictures are printed.
≥ Exit PictBridge by disconnecting the USB cable (supplied) after the
pictures have been printed.
When you stop printing halfway
Move the joystick down.
A confirmation message appears. If [YES] is selected, the number of prints set is canceled and the
screen returns to step 3. If [NO] is selected, all the settings are kept and the screen returns to
step 3.
A confirmation message appears. If [YES] is selected, the number of prints set is canceled and the
screen returns to step 3. If [NO] is selected, all the settings are kept and the screen returns to
step 3.
≥ Avoid the following operations during printing.
These operations disable proper printing.
– Disconnecting the USB cable
– Removing the SD card
– Switching the mode dial
– Turning off the power
– Disconnecting the USB cable
– Removing the SD card
– Switching the mode dial
– Turning off the power
≥ Check the settings for the paper size, quality of
print, etc. on the printer.
≥ The sides of pictures recorded when [
]
(VDR-D300)/[
] (VDR-D250) is set may be cut
at printing. Check before printing.
When using the printer with a trimming feature or
other feature which cuts out both edges of the
pictures, cancel the feature for printing. (Refer to the
operating instructions of the printer for details.)
When using the printer with a trimming feature or
other feature which cuts out both edges of the
pictures, cancel the feature for printing. (Refer to the
operating instructions of the printer for details.)
≥ You may not be able to print still pictures recorded
with other products.
≥ When the unit is connected directly to the printer,
the DPOF settings cannot be used.
≥ Connect the printer directly to this unit. Do not use a
USB hub.
STANDARD: Size specific to the printer
4t5 INCH:
4t5 INCH:
L size
5t7 INCH:
2L size
4t6 INCH:
Postcard size
A4:
A4 size
STANDARD: Layout specific to the printer
:
No frame print
:
Frame print
2
1.7
D250&300(P_PC)eng.book 110 ページ ２００６年１月２０日 金曜日 午後２時３分