DXG Technology DXG-518 사용자 설명서
4.1.8. Metering
Use this option to determine how the camera light metering is used to
calculate the exposure of the picture.
1.
calculate the exposure of the picture.
1.
Turn the camera on and ensure it is in Photo mode.
2.
Press the Menu button and move the joystick down to the second
page to highlight the Metering option.
page to highlight the Metering option.
3.
Use the joystick to select matrix , a center weighted
value , or a spot value in the center of the scene .
value , or a spot value in the center of the scene .
4.
Press the Menu button again to exit.
4.1.9. Exposure adjustment (EV)
Use this setting to change the exposure for the pictures. Usually, this
value would be set to zero. Increase the value to light up a subject with
strong back lighting, or decrease the value if taking a picture of
something very bright.
1.
value would be set to zero. Increase the value to light up a subject with
strong back lighting, or decrease the value if taking a picture of
something very bright.
1.
Turn the camera on and ensure it is in Photo mode.
2.
Press the Menu button and move the joystick down to the second
page to highlight the EV option.
page to highlight the EV option.
3.
Use the joystick to adjust EV value. The range is from –2.0 to +2.0.
4.
Press the Menu button again to exit.
Note: The Metering and EV options are enabled only when photo
mode is set to program (manual).
mode is set to program (manual).
32