EuroLite Cases KB-212A 사용자 설명서

KB_SERIES_ACTIVE.DOC

31/31

2)  There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,

trussing).

3)  The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or

sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.

DANGER TO LIFE!

We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!

There are no servicable parts inside the device except for the fuse. Maintenance and service operations are
only to be carried out by authorized dealers.

If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.

Step 1: Open the fuseholder on the rearpanel with a fitting screwdriver.
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing.

If the speaker-system distorts, one of the loudspeakers may be defective. Test the speaker-system once
more with another sound-signal. If the sound remains distortet, the speaker-systeem should not be operated
any more in order to prevent further damage. Please contact your dealer.

If clacking sounds are heard from the speaker-system, screws may have loosended due to the continuous
vibrations. The speaker-system should be checked by a specialist. Especially for public use, the speaker-
system should be checked before every operation so that the speaker-system and the speakers in the
systems are always well fixed.

Should you need any spare parts, please use genuine parts.

If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.

Should you have further questions, please contact your dealer.