Energizer FLEX8C 사용자 설명서

 

3

 
The USBird support unit code was designed to be simple to use. To keep this 
manual down in size the obvious settings and displays will not be covered.  The 
term "RECORDER" will be used when referring to the HAWK/4/8/8A, FALCON/4, 
EAGLE8 /A/B/C/D/E, FLEX8E, and all other ADS recorders with a built in USB 
port.  Since the HAWK is the first of the new family to be released, the 
terminology in this manual will be “HAWK”, however the EAGLE8 / A and all 
new ADS recorders will use this PC program (USBIRD) for interface and 
data archive.  
 
For the hardware description of the HAWK, FALCON, EAGLE8/ A/B/C, 
MONO8, FLEX8C and other recorders refer to Sec- 6, Sec-7, and Sec-8.  
 
Section- 9 describes the PLAYER program plays the  “audio” and “video” data 
from the CD or DVD. The PLAYER program, which is automatically written to the 
“CD” or “DVD” can also be installed on any computer that contains a CD/DVD-
ROM and a sound card. The installation steps are the same as given below. For 
help, call ADS at 949 955-3103. 
 
1.1 SYSTEM REQUIREMENTS 
 
The CPU should be at least Pentium III or higher with 600 MHz processing 
speed, 128 Megabyte RAM, and at least 20 Gigabytes of hard drive space.  The 
supported operating systems are Windows 98, 2000, XP, VISTA, and ME.  
 
 
1.2 INSTALLATION 
 
The software is supplied on one CD. It can also be retrieved from our Web Site at 
(www.adaptivedigitalsystems.com) under Windows Support Code. Instructions 
are shipped with every update and are also on the website. A copy is included 
below. The CD contains the following folders: 
 

If the USBird version is 2.7x and higher the separate MJPG_CODEC 
installation will no longer be needed because we now hard code our own 
MJPEG Codec into the software.