Viewsonic NMP-500 사용자 설명서

3

In the DHCP field of the Network Configuration screen, tap the down arrow for the pull-

down menu and select Enabled to dynamically get network parameters. Make sure there are 
values in the IP address, Mask, Gateway, and DNS fields although DHCP assigns values to 
these fields automatically. If you select Disabled, type valid network parameters in these 
fields.

4

If any changes were made to this screen, do the following: 

• To enable the changes, click Apply
• To save the changes, click the Administration menu > click Save Configuration > click Save.

The Browser Configuration screen allows you to make specific screen settings for a specific 
URL that you chose. Click Management > Browser. The screen shown below appears. Note: 1 
millisecond = 1/1000th second.

1

In the Macromedia Flash Transparency Source field, select one of the options from the 

pull-down menu.

2

In the Screen rotation angle (clockwise) field, select one from the pull-down menu for the 

angle of rotation of the HTML content displayed on-screen. This feature is useful when the 
NMP-500 is installed vertically.

3

In the Browser Proxy field, select Enabled or Disabled from the pull-down menu.