Sony KF-50XBR800 사용자 설명서
Introducing the Sony LCD Projection TV
15
Intr
oduc
ing
the So
n
y
LCD Pr
ojec
tion
TV
5
Loosen the two screws that secure the lamp, then pull out the lamp.
The lamp is very hot immediately after use. Never touch the front glass
of the lamp or the surrounding parts.
The lamp is very hot immediately after use. Never touch the front glass
of the lamp or the surrounding parts.
6
Mount the new lamp.
Be sure to attach the new lamp securely.
Be sure to attach the new lamp securely.
7
Mount the lamp cover and tighten the screw.
Make sure that the lamp cover is mounted securely, otherwise the power
will not turn on.
Make sure that the lamp cover is mounted securely, otherwise the power
will not turn on.
✍
After it has cooled, place the removed lamp into the empty box of the
replacement lamp. Never put the removed lamp into a plastic bag.
replacement lamp. Never put the removed lamp into a plastic bag.
✍
If the lamp cover is not mounted securely, the self-diagnostic
function works and the STAND BY indicator flashes for three times
(See page 90).
function works and the STAND BY indicator flashes for three times
(See page 90).
Loosen the two screws with the
hex key supplied with the lamp.
hex key supplied with the lamp.
Hold the handle and pull
straight out.
straight out.
Mount the new lamp securely
into the lamp receptacle.
into the lamp receptacle.
Tighten the two screws securely in the
order of
order of
1
to
2
, as shown in the
illustration using the supplied hex key.
Match the projection of the right
side of the lamp cover with the
hole of the unit, and replace the
lamp cover as it was.
side of the lamp cover with the
hole of the unit, and replace the
lamp cover as it was.
(Continued)