Siemens Gigaset C450IP 사용자 설명서
45
Base station settings
Gigaset C450 IP / Greek eng / A31008-M1713-T151-3-8U19 / settings_bs_hs_pabx.fm / 24.9.07
Ver
si
on 4, 16.
09.20
05
Base station settings
The base station settings are carried out
using a registered Gigaset C45 handset.
Changing the system PIN
You have to enter the system PIN when
registering a handset to the base station.
You can change the base station's 4-digit
You can change the base station's 4-digit
default system PIN ("0000") to a 4-digit
PIN known only to yourself.
§Menu§
¢
Settings
¢
Base
¢
System PIN
~
Enter current system PIN and
press
§OK§
.
~
Enter your new system PIN
and press
§OK§
.
~
Now re-enter the new system
PIN and press
§OK§
.
For security reasons, "****" is displayed
instead of the numbers entered.
a Press
a Press
and
hold (idle status).
Restoring the base station to
factory settings
factory settings
Each individual setting is reset, in particu-
lar:
u VoIP settings such as VoIP provider and
u VoIP settings such as VoIP provider and
account data and DTMF settings
u Settings for the local network
u Default connection (page 46)
u The names of the handsets (page 40)
u SMS settings (e.g.SMS centres,
u The names of the handsets (page 40)
u SMS settings (e.g.SMS centres,
u Settings for the connection to the PABX
SMS lists and calls lists are deleted.
The date and time and the system PIN are
The date and time and the system PIN are
retained. The handsets are still registered.
§Menu§
¢
Settings
¢
Base
¢
Base Reset
§OK§
Press the display key to
confirm.
Resetting the base station using a key
on the base station
As with resetting the base station via the
menu, all individual settings are reset. The
system PIN will also be reset to "0000" and
all handsets registered above and
beyond the delivery scope are deregis-
tered.
¤
Remove the cable connections from
the base station to the router and fixed
network.
¤
Remove the base station mains unit
from the socket.
¤
Press and hold the registration/paging
¤
Plug the mains unit back into the power
socket.
¤
Press and hold the registration/paging
key (at least 10 sec.).
¤
Release the registration/paging key.
The base station has now been reset.
Activating/deactivating repeater
mode
mode
With a repeater you can increase the range
and reception strength of your base sta-
tion. You have to activate the repeater
mode for this. This will terminate any calls
being made via the base station at that
time.
Precondition: a repeater is registered.
Precondition: a repeater is registered.
§Menu§
¢
Settings
¢
Base
¢
Additional
Features
¢
Repeater Mode
Select and press
§OK§
(
‰ = on).
Please note:
For how to reregister the handsets after reset-
ting if necessary, see page 39.