Polycom 1725-16828-001 사용자 설명서

Deployment Guide for the Polycom VVX 1500 C

3 - 10

Configuration changes can be performed centrally at the provisioning server 
or locally. For detailed information on configuration file settings, refer to 

.

You will need to create two configuration files for each 
phone—phone1[MACAddress].cfg and [MACAddress].cfg—and one 
configuration file for all phones in your installation—sip[XXXX].cfg.
For more information on why to create another configuration file, refer to the 
“Configuration File Management on Polycom VVX 1500 C Phones” white 
paper at 

http://www.polycom.com/global/documents/support/technical/products
/voice/white_paper_configuration_file_management_on_soundpoint_ip_ph
ones.pdf 

.

For more detailed information on specific parameters in configuration files, 
refer to 

.

Deploy Polycom VVX 1500 C phones by:

Create a per-phone configuration file by using the phone1.cfg file from 

the distribution as templates.
For example, create phone1_0004f2be80a4.cfg 

Use an XML editor to create/edit the configuration files. In this way, all configuration 
files that you create will be valid XML files.

If the configuration files are not valid, they will not load on the phone. An error 
message will be logged to the provisioning server.

Obtain the phone’s MAC address from the barcoded label on underside of phone or 
on the outside of the shipping box.