Sony RDR-GX7 사용자 설명서
77
Video Settings
Sett
ings
a
nd Adjustment
s
Pause Mode (DVDs only)
Selects the picture in pause mode.
Component Out
Selects if the video signals are output from the COMPONENT
VIDEO OUT jacks.
VIDEO OUT jacks.
Notes
• When you set “Line 1 Output” to “RGB,” you cannot set “Component
Out” to “On.”
• When you connect the recorder to a monitor or projector via only the
COMPONENT VIDEO OUT jacks, do not select “Off.” If you select
“Off” in this case, the picture may not appear.
“Off” in this case, the picture may not appear.
Scart Setting
Sets the method of inputting/outputting signals from the SCART
(EURO AV) jacks on the rear panel of the recorder. Select an
option for each of the items below according to the combination
of jacks and methods that you are going to use.
(EURO AV) jacks on the rear panel of the recorder. Select an
option for each of the items below according to the combination
of jacks and methods that you are going to use.
◆Line1 Output
Selects a method of inputting video signals for the LINE 1-TV
jack.
Selects a method of inputting video signals for the LINE 1-TV
jack.
Notes
• If your TV does not accept S video or RGB signals, no picture appears
on the TV screen even if you select “S Video” or “RGB.” See the
instructions supplied with your TV.
instructions supplied with your TV.
• You cannot select ”RGB” when “Component Out” above is set to
“On.”
• SMARTLINK is available only when “Video” is selected.
◆Line3 Input
Selects a method of inputting video signals for the LINE 3/
DECODER jack.
Selects a method of inputting video signals for the LINE 3/
DECODER jack.
◆Line3 Output
Selects a method of outputting video signals for the LINE 3/
DECODER jack.
Selects a method of outputting video signals for the LINE 3/
DECODER jack.
Line4 Input
Selects the method of inputting video signals from the LINE 4
IN jack on the rear panel of the recorder.
IN jack on the rear panel of the recorder.
Auto
The picture, including subjects that
move dynamically, is output with no
jitter. Normally select this position.
move dynamically, is output with no
jitter. Normally select this position.
Frame
The picture, including subjects that do
not move dynamically, is output in
high resolution.
not move dynamically, is output in
high resolution.
On
Outputs the component video signals.
Off
Outputs no signals.
Video
Outputs video signals.
S Video
Outputs S video signals.
RGB
Outputs RGB signals.
Video/RGB
Inputs video signals or RGB signals.
S Video
Inputs S video signals.
Decoder
Select this when connecting to a PAY-
TV/Canal Plus decoder.
TV/Canal Plus decoder.
Video
Outputs video signals.
S Video
Outputs S video signals.
Video
Inputs video signals.
S Video
Inputs S video signals.