ZyXEL Communications 2000W_V2 사용자 설명서

Prestige 2000W_V2 Quick Start Guide

17

This section describes how to log into the Prestige’s web configurator. 

The web configurator has two accounts. The user account lets you configure the Prestige’s basic settings. The 
administrator’s account allows you to alter the way the Prestige makes and receives calls, for example 
selecting a voice codec. 

Note: Do not attempt to change the administrator settings unless you know what you are doing. These 

settings affect the way your Prestige makes and receives calls and are already configured for 
best performance. 

7 Select a keypad mode and use the keypad to enter the callee’s  listening port 

number. Use the Power/End key to clear the default text and remove typos. 
Leave this blank if you will use the SIP proxy server to call this number or you 
were not given a port number to use. Press the OK key when you are done. 

8 Select Proxy if calls to this party use your SIP account.

Select P2P if calls to this party use a different SIP server or go directly to the 
callee’s VoIP phone (peer-to-peer). 

9 Press the Right key twice to save your settings and return to the main screen.

To make or receive calls, first ensure that the main screen displays Registered.

• Dial the desired number using the keypad and press the green Call key.
• If the phone number is in the Prestige’s phonebook, press the Right key to enter 

the phonebook. Use the up or down arrow key to choose the name and then press 
the Call key.

• Use the volume keys on the left side of the phone to adjust the volume. 

 

• Press the red Power/ End key to terminate a call.
• To receive a call, press the green Call key.
• To reject a call, press red Power/ End key.