Technicolor - Thomson 42 WM 03 L 사용자 설명서

30 Plasma Monitor

Miscellaneous

You can program your remote control for it to control other devices. Before following the adjustment procedure below, look for the 3-
digit code number(s) corresponding to the make of the device(s) to be controlled in the list of codes enclosed separately, then insert
them in the table below.

Amplifier

VCR

Your remote control has been factory-set to control the 

Volume +/- and Mute (

) functions on the THOMSON DPL 2000 amplifier.

If you wish to control the 

Volume +/- and Mute (

) functions on your set, you

must change the factory-settings as follows:

1. Slide the 

key to the 

plasma position.

2. While maintaining the

key pressed, key in the code "001".

3. Release the 

menu button.

Volume +/- and Mute (

) keys are now configured to control the set. To control the amplifier, place the key on the 

hi-fi position.

To return to factory-settings, repeat the above procedure, keying in "000".

1. Position the switch on the device that you want to control.

2. Keep the

key down and enter the 3-digit code.

3. Release the 

menu 

key.

• Try to control the device by turning it off, then on with the

key

(the above key being on the corresponding position).

• If this does not work, repeat the process from step 2 with another 3-digit code.

• Some devices cannot be controlled by the universal remote control supplied.

• Test the functions that you can control by using this remote control.

• According to the devices and the date they were put on the market, all the functions may not be available.

• 

Satellite receiver

DVD or LD unit

Amplifier

Monitor

Code

Code