Toshiba 19L4200U 사용자 설명서

88

When you use ColorStream

®

 HD or Video, switch the AV input 

mode appropriately.

You can select the optical audio output format when you connect a 
Dolby

®

 Digital decoder or other digital audio systems to the TV’s 

Optical Audio Out terminal (see 

).

To select the optical audio output format:

Press the MENU button and open the Sound menu.

Highlight Audio Setup, and then press the ENTER button.

In the Digital Output Format field, select either Dolby 
Digital or PCM, depending on your device.

To save the new settings, highlight Done, and then press the 
ENTER button.

To reset the settings to the factory defaults, highlight Reset, 
and then press the ENTER button.

You can further compress Dolby Digital dynamic range, allowing 
you to switch from digital to analog broadcasts at the same dynamic 
range.

To use the Dolby Digital Dynamic Range Control:

Press the MENU button and open the Sound menu.

Highlight Audio Setup, and then press the ENTER button.

In the Dolby Digital Dynamic Range Control field, select 
either Compressed or Standard. When Standard is selected, 
the audio outputs with minimal compression.

To save the new settings, highlight Done, and then press the 
ENTER button.

To reset the settings to the factory defaults, highlight Reset, 
and then press the ENTER button.

❖

This feature is available when the TV is tuned to a digital RF 
channel with the Dolby Digital signal.

❖

The Dolby Digital Dynamic Range Control will function in 
relation to Optical Output Format (PCM mode).