Technika LCD 26-56D 사용자 설명서

9

9

fi g 1

fi g 2

For optimum viewing, 
if wall mounting the TV 
higher than eye level, 
the TV should be tilted 
downwards so that the 
TV’s screen is ‘face on’. 
See fi g 1 and 2 

Attaching the Stand

1) Insert the stand into the neck of the TV. 

 

2) Secure the stand using the screws provided.

Detaching the Stand

1) To remove the base, press close and rotate 45 degrees.   
2) Remove the 4 screws highlighted

IMPORTANT - Before drilling any holes in the wall ensure you are 
not drilling where there could be any electric wires, water or gas 
pipes. If in doubt please contact a qualifi ed tradesman.

Wall mounting the TV

This television requires a VESA 200 x 100 (26’’) VESA 400 x 200 (32’’) wall mount, or equivalent. 
1) Remove the four screws highlighted below.
2) The wall mount can now be easily attached to the mounting holes on the rear of the TV. These holes 
are indicated in the picture below.

Important – If wall mounting this TV, only 
use the screws already provided in the wall 
mounting holes. Using other screws which 
are longer could cause irreparable damage to 
internal parts.

TV

TV

Viewing angle

Viewing angle

Attaching / detaching the stand and wall mounting

3) Remove the screw/s in the neck of 
the stand (where fi tted)

INCORRECT

CORRECT

Technika-User Guide-56 series all models.indd   Sec1:9

Technika-User Guide-56 series all models.indd   Sec1:9

12-Dec-11   9:49:42 AM

12-Dec-11   9:49:42 AM