Viewsonic VPW450HD 사용자 설명서

ViewSonic VPW450HD

ADJUSTING PICTURE

For AV / S-Video

Accessing Picture Adjustment Mode
Various picture adjustments can be set using the Picture

Adjustment OSD menu. To access the OSD menu:

1. Press the MENU +/- keys on the remote or the front con-

trol panel.

2. The first menu displayed is the PICTURE menu. Make

sure that the “Picture” OSD menu is displayed.

3. Use the MENU +/- keys to move up and down to choose

the option you wish to adjust. An explanation of each

adjustment is listed below.

4. Use the ADJ +/- keys to change the setting.

Notes:
1. Each of the (4) color temperature settings may not be exactly equal to the temperature setting as defined;

however, it will be approximately close.

Notes:
These controls are avail-

able when input selection
is set to: AV1 and AV2
(S) inputs.

To restore picture settings

to the factory defaults,

simply press the RECALL

key from the remote con-

trol.

CONTRAST

Adjust Contrast to increase the level of “white” in the video picture.

Increasing contrast will make white areas of the video picture

brighter. Contrast works in conjuction with BRIGHTNESS.

BRIGHTNESS

Adjust brightness to enhance the level of dark areas in the video

picture such as night scenes and shadow scenes. Increasing

brightness will make dark areas more visible.

COLOR

Use color to adjust the color saturation of the video picture.

Increasing color will make the color more intense. Reducing color

setting will make the color less intense.

TINT

Use tint to adjust the color of fleshtones. Increasing the tint setting will shift

the picture with more cyan (more green appearance). Decreasing the setting

will shift the picture with more magenta (more red appearance).

SHARPNESS

Use sharpness to adjust the amount of detail enhancement to the video

picture. Increase the setting will enhance the edges of objects in the

video picture. Decreasing the setting will reduce enhancement.

COLOR TEMPERATURE

Select the color temperature for white balance. There are four settings

to choose from: (1) 6500D - sets the white balance to 6500D; (2) LOW -

sets to 5400K; (3) MID - sets to 9300K; (4) HIGH - sets to 13800K

CLOCK PHASE

Use clock phase to fine-tune the display to perfectly synchronize the

video’s signal source. This function is not applicable in this mode.

SCREEN WIDTH

Use to change various screen width modes. See page 16 for more

information.

ZOOM

Use to change various digital zoom modes. See page 16 for more

information.