3D Connexion ZT1000 사용자 설명서

50 

Removing and Replacing Parts 

zt1100/xz200 and xt1500 Series 

 

 

Troubleshooting and Self-Repair Guide 

The notebook has no SDRAM built into its motherboard, but has two slots for PC133 SDRAM 
modules: a system SDRAM slot beneath the keyboard (containing an SDRAM module installed at the 
factory), and an expansion slot on the bottom of the unit. 

Module, SDRAM, 128 MB DDR, PC266 SODIMM  

F4694-60901 

 

Module, SDRAM, 256 MB DDR, PC266 SODIMM  

F4695-60901 

 

Module, SDRAM, 512 MB DDR, PC266 SODIMM  

F4696-60901 

 

 

Provide proper grounding and handle the SDRAM module only by its edges, or you could 
damage the module through electrostatic discharge. 

 

•  #0 Phillips screwdriver. 

1.  Unplug the AC adapter, if present, and remove the battery. 

2.  On the bottom of the notebook, loosen the screw holding the SDRAM cover (the cover retains the 

screws), and remove the cover. 

3. Press outward to release the latches at the sides of the SDRAM module (so that the free edge of 

the module pops up), then pull the module out of the connector.