Avaya P333R-LB 사용자 설명서
Chapter 12
Avaya P330 Layer 3 Features
94
Avaya
P333R-LB User’s Guide
Note:
If the IP interface is on VLAN #1, continue with step 7.
6
Create the management/routing VLAN. Use the command
set vlan
set vlan
<Vlan-id> name <Vlan-name>
replacing <Vlan-id> by the
VLAN number, and <Vlan-name> by the VLAN name. Press Enter.
7
Create an IP interface name. Type:
Router(configure)# interface <interface-name>
Press Enter.
The Router(configure-if:<interface-name>)# prompt appears.
Router(configure)# interface <interface-name>
Press Enter.
The Router(configure-if:<interface-name>)# prompt appears.
8
Assign the IP address and network mask of the IP interface you have created.
Use the command:
Router(configure-if:<interface-name>)# ip address
Use the command:
Router(configure-if:<interface-name>)# ip address
<ip-
address> <netmask>
Press Enter
Press Enter
9
Assign a vlan to the IP interface you have created. Type: Assign a vlan to the IP
interface you have created. Type:
Router(configure)# interface <interface-name># ip vlan
interface you have created. Type:
Router(configure)# interface <interface-name># ip vlan
<vland-id>
Press Enter.
Press Enter.
10 Type exit and press Enter. This returns you to the prompt:
Router(configure)#
11 If the management station is not on the same subnet as the switch, configure a
default gateway (static route). Use the command:
ip default-gateway
ip default-gateway
<ip-address>
and press Enter, replacing
<ip-address>
with the IP address of the default gateway.
12 Save the configuration changes by typing copy running-config
startup-config
and press Enter.