Lg Electronics 20LC1R 사용자 설명서

다운로드
페이지 44
34
You can connect additional equipment, such as VCRs, camcorders
etc. to your set. Examples are shown below.
Note: Here shown may be somewhat different from your set.
Aerial socket
1.  Connect the RF out socket of the VCR to the aerial socket of
the set.
2.  Connect the aerial cable to the RF aerial in socket of the VCR.
3. Store the VCR channel on a desired programme number using
the ‘Manual programme tuning’ section.
4.  Select the programme number where the VCR channel is
stored.
5. Press the PLAY button on the VCR.
Euro scart socket (VCR)
1.  Connect the Euro scart socket of the VCR to the Euro scart
socket of the set.
2. Press 
the 
PLAY button on the VCR.
If your VCR outputs an AV switching signal via the Scart lead the
set will auto switch to 
AV 1 mode on start of playback, but if you
want to keep on watching in TV mode, press the 
D
 
E
 
or NUM-
BER buttons.
Otherwise press the INPUT button on the remote control 
handset to select 
AV1. The VCR play back picture appears on
the screen.
You can also record programmes received by the TV on video
tape.
Note : 
a. Signal type RGB, i.e. the signals red, green and blue can only
be selected for the Euro scart and the 
AV1 can be received.
These signals are transmitted, for example, by a pay TV
decoder, game machine or photo CD unit, etc.
b. Please use shielded scart cable.
Audio/Video in sockets
1.  Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set.
2. Press 
the 
INPUT button to select 
AV 2.
3. Press 
the 
PLAY button on the VCR.
The VCR playback picture appears on the screen.
Note : If you have a mono VCR, connect the audio cable from the
VCR to the AUDIO L/MONO socket of the set.
AV 1
S-VIDEO
AV IN 2
RGB(PC/DTV) IN
ANTENNA
VIDEO
VCR
ANTENNA IN
VCR
Connection of external equipment
AV 1
S-VIDEO
AV IN 2
VIDEO
VCR