Lg Electronics 50PJ350C 사용자 설명서

APPENDIX

118

APPENDIX

2.. O

OSSD

D SSeelleecctt ((C

maannd

d:: kk ll))

To select OSD (On Screen Display) on/off.

Transmission [k][l][ ][Set ID][ ][Data][Cr]

Data 00: OSD off

Data 01: OSD on

Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x]

3.. R

Reem

ottee C

onnttrro

oll LLo

occkk M

dee ((C

maannd

d:: kk m

m))

To lock the remote control and the front panel controls
on the TV.

Transmission [k][m][ ][Set ID][ ][Data][Cr]

Data 00: Lock off

Data 01: Lock on

Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x]

If you’re not using the remote control and front panel
controls on the TV, use this mode. When main power is
on/off, remote control lock is released.

4.. T

Trreeb

bllee ((C

maannd

d:: kk rr))

To adjust treble.

You can also adjust treble in the AUDIO menu.

Transmission [k][r][ ][Set ID][ ][Data][Cr]

Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)

*Refer to ‘Real data mapping’.

p.116.

Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x]

1 5

5 .. B

Baassss ((C

maannd

d:: kk ss))

To adjust bass.

You can also adjust bass in the AUDIO menu.

Transmission [k][s][ ][Set ID][ ][Data][Cr]

Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)

*Refer to ‘Real data mapping’.

p.116.

Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x]

6.. B

Baallaannccee ((C

maannd

d:: kk tt))

To adjust balance.

You can also adjust balance in the AUDIO menu.

Transmission [k][t][ ][Set ID][ ][Data][Cr]

Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)

*Refer to ‘Real data mapping’.

p.116.

Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x]

7.. C

ollo

orr T

Teem

peerraattuurree ((C

maannd

d:: xx uu))

To adjust color temperature.

You can also adjust color temperature in the PICTURE menu.

Transmission [x][u][ ][Set ID][ ][Data][Cr]

Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)

*Refer to ‘Real data mapping’.

p.116.

Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]

8.. IISSM

M M

Meetthho

d ((C

maannd

d:: jj p

p))

To avoid having a fixed image remain on screen.

Transmission [ j ][p][ ][Set ID][ ][Data][Cr]

Data 02: Orbiter

04: White Wash

08: Normal

20: Color Wash

Acknowledgement [p][ ][Set ID][ ][OK/NG][Data][x]

9.. EEnneerrggyy ssaavviinngg ((C

maannd

d:: jj q

q))

To control the low energy function on/off.

Transmission [ j ][q][ ][Set ID][ ][Data][Cr]

Data 00: Energy Saving off

01: Energy Saving: Minimum

02: Energy Saving: Medium

03: Energy Saving: Maximum

05: Screen Off

10: Intelligent Sensor

Acknowledgement [q][ ][Set ID][ ][OK/NG][Data][x]

0.. A

Auutto

o C

onnffiigguurraattiio

onn ((C

maannd

d:: jj uu))

To adjust picture position and minimize image shaking
automatically. Auto configuration only works in RGB-PC
mode.

Transmission [ j ][u][ ][Set ID][ ][Data][Cr]

Data 1: To set

Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]

1.. C

Chhaannnneell T

Tuunniinngg ((C

maannd

d:: m

m aa))

To tune channel to following physical/major/minor number.

Transmission [m][a][ ][Set ID][ ][Data00][ ][Data01]

[ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]

Digital channels have a Physical, Major, and Minor channel
number. The Physical number is the actual digital channel
number, the Major is the number that the channel should
be mapped to, and the Minor is the sub-channel. Since
the ATSC tuner automatically maps the channel to the
Major number, the Physical number is not required when
sending a command.

Data 00: Physical Channel Number

NTSC air: 02~45, NTSC cable: 01, 0E~7D

ATSC air: 01~45, ATSC cable: 01~87

Data 01 & 02: Major Channel Number

Data 01: High byte Data 02: Low byte

Two bytes are available for the Major and Minor, nor-
mally only the second byte is used.

Data 03 & 04: Minor Channel Number

Not needed for NTSC.

Downloaded From TV-Manual.com Manuals