VIZIO E320ME 사용자 설명서
6
23
E320ME
Enabling or Disabling Color Enhancement
Color enhancement reduces oversaturation of some colors and improves flesh
tones.
Color enhancement reduces oversaturation of some colors and improves flesh
tones.
To adjust this setting, Picture Mode must be set to Custom.
To enable or disable the color enhancement setting:
1. Press the
OK button on the remote. The on-screen menu is displayed.
2. Use the
Arrow buttons to highlight Picture and press OK.
3. Use the
Arrow buttons to highlight More and press OK.
4. Use the
Arrow buttons to highlight Color Enhancement.
5. Use the
Left/Right Arrow buttons to change the setting to Off or On.
6. Press
EXIT.
Enabling or Disabling Adaptive Luma
Adaptive luma adjusts the average brightness of the picture to compensate for
large areas of brightness.
Adaptive luma adjusts the average brightness of the picture to compensate for
large areas of brightness.
To adjust this setting, Picture Mode must be set to Custom.
To enable or disable the adaptive luma setting:
1. Press the
OK button on the remote. The on-screen menu is displayed.
2. Use the
Arrow buttons to highlight Picture and press OK.
3. Use the
Arrow buttons to highlight More and press OK.
4. Use the
Arrow buttons to highlight Adaptive Luma.
5. Use the
Left/Right Arrow buttons to change the setting to Off or On.
6. Press
EXIT.
Enabling or Disabling DCR (Dynamic Contrast Ratio)
Dynamic contrast ratio changes contrast according to displayed content for the
best picture quality.
Dynamic contrast ratio changes contrast according to displayed content for the
best picture quality.
To adjust this setting, Picture Mode must be set to Custom.
To enable or disable the DCR setting:
1. Press the
OK button on the remote. The on-screen menu is displayed.
2. Use the
Arrow buttons to highlight Picture and press OK.
3. Use the
Arrow buttons to highlight More and press OK.
4. Use the
Arrow buttons to highlight DCR.
5. Use the
Left/Right Arrow buttons to change the setting to Off or On.
6. Press
EXIT.
Resetting the Picture Settings
To restore the TV’s picture settings to the factory defaults:
To restore the TV’s picture settings to the factory defaults:
1. Press the
OK button on the remote.
The on-screen menu is displayed.
2. Use the
Arrow buttons to highlight
Picture and press OK.
3. Use the
Arrow buttons to highlight
Reset Picture Mode, then press OK.
4. Use the
Arrow buttons to highlight OK
and press
OK.
5. Press
EXIT.