VIZIO E551VA 사용자 설명서

E551VA

Installing the TV on a Wall
To mount your TV on a wall, you will need a wall mount. Consult the information
below to find the appropriate mount for your TV model:

E551VA

Screw Size:

Screw Length:

15mm

Screw Pitch:

1mm

Hole Pattern:

400mm (V) x 200mm (H)

Installing a TV on a wall requires lifting. To prevent injury or damage
to the TV, ask someone to help you.

Be sure the mount you choose is capable of supporting the weight of the TV. After
you have determined that you have the correct mount for your TV, you can begin
the installation.
To install your TV on a wall:

1. Turn off the TV. Disconnect any cables connected to your TV.

2. Place the TV face-down on a clean, flat, stable surface. Be sure the surface

is clear of debris that can scratch or damage the TV.

3. Loosen and remove the thumb screws. Pull the base away from the stand

neck. The base should be stored for future use.

4. Use a phillips-head screwdriver to remove the 4 screws from inside of the

base neck. Pull the base neck away from the TV. The base neck should be
stored for future use.

5. Attach your TV and wall mount to the wall, carefully following the

instructions that came with your mount.

Use only with a UL-listed wall mount bracket rated for the weight/load of
this TV. See

Appendix A - Specifications for the weight of this TV.

3. Insert and tighten the 4 included

thumbscrews.

4. Be sure all four thumbscrews are

inserted and tightened as shown. Fold
the tabs down so they are flush with
the bottom of the base.

5. Move the TV with attached stand into

an upright position and place on a flat,
level, and stable surface.

6. To ensure proper ventilation, leave at

least 1” of space between the back of
the TV and any other objects (walls,
etc).

1”