Aiphone IP EWST-POE 사용자 설명서

다운로드
페이지 60
TalkMaster Menu Options 
36 
Adjust Levels 
•  Microphone audio sent to intercoms - with the radio button selected, adjusting the slider 
affects the Windows Microphone Recording volume  
•  Internet or ‘Line In’ audio set to intercom - no adjustment allowed 
•  Audio from Intercoms (heard on this PC) - with this radio button selected, two options are 
presented 
•  Master Volume - adjusts the Windows Master volume control 
•  Volume from intercoms - adjusts the Windows .wav file volume 
Common IP Ports - is a list of commonly used port numbers. You may reference this if you 
need to change the standard ports used by TalkMaster™. 
Record program events to file - should only be checked if directed by Aiphone Technical 
Support.  Leaving this option checked for an extended period of time can cause TalkMaster™ 
performance to be affected. 
Reset All Connections - will cause TalkMaster to drop all current IP connections to active 
intercoms and force them to reconnect to TalkMaster™. 
Console Menu 
 
Forward Intercoms - brings up a dialog box allowing you to temporarily forward all of the active 
intercoms to another PC running TalkMaster™.  Refer to Forward Intercoms for complete 
instructions. 
Retrieve Intercoms - will retrieve any intercoms from other PC’s running TalkMaster that have 
this PC’s IP address assigned as their primary server to connect to.  This can be used to 
retrieve intercoms that have been forwarded via the Forward command or by the Intercom’s 
Fail Forward configuration to another console 
Unattended Console - allows you to temporarily suspend the consoles operation.  Any 
intercom that tries to contact the console is notified that no one is available to take their call.  A 
dialog pops up reminding you that this mode has been set.  Clicking the Cancel button returns 
the console to normal operation. 
This setting is saved between TalkMaster sessions. 
Admin Menu 
The Admin Menu allows you to configure TalkMaster™ for your environment.   
 
To activate all of the options on the Admin Menu, click Enable Admin.  You will be asked to 
enter your Admin password (default is admin).  The full Admin Menu will then be activated.