JVC LPT1029-001A 사용자 설명서

다운로드
페이지 92
Masterpage:Right+
Filename [MH50SEK_11Editing.fm]
EDITING
Page 61
Friday, 14 January 2005  16:44
Manual Dubbing (From HDD To DVD)
It is possible to perform dubbing in the desired transfer rate.
1
Load a recordable disc.
2
Press DUBBING to access the Dubbing Menu screen.
3
Press selection keys to select 
AHDDNDVDB, then press 
4
Press selection keys to select 
5
Perform step 5 of 
(A pg. 60). The Manual Dubbing screen appears.
6
Press selection keys to select 
AREC MODEB, then press 
ENTER. Press selection keys to select the desired option, 
then press ENTER
7
Press selection keys to select 
8
Press selection keys to select 
If 
AAUTO PWR OFFB is selected, the unit will turned off after 
dubbing is completed.
In Video mode, if the selected play list includes the scenes 
recorded in the different transfer rate, the dubbing is performed in 
the highest transfer rate of the scenes in the selected play list. 
However, the lower transfer rate cannot be dubbed in the higher 
transfer rate.
The recordable time of the disc is displayed on the bar meter. For 
details, refer to 
During dubbing, it is not possible to play back on HDD or DVD, or 
to set timer programming.
Original Dubbing (From DVD To HDD)
It is possible to dub the original recordings on DVD discs to the 
HDD deck.
1
Load a disc you want to dub.
2
Press DUBBING to access the Dubbing Menu screen.
3
Press selection keys to select 
ADVDNHDDB, then press 
4
Press selection keys to select indexes (small pictures) of 
desired original recordings and/or play lists, then presMARK
After selecting all indexes you want to dub, press ENTER.
You can select up to 8 original recordings and/or play lists.
5
Press selection keys to select 
If 
AAUTO PWR OFFB is selected, the unit will turned off after 
dubbing is completed.
It is not possible to dub play lists on DVD discs.
It is not possible to dub pre-recorded DVD VIDEO discs.
It is not possible to dub Video CDs/SVCDs or Audio CDs.
About Disc Remaining Display
When dubbing from HDD to DVD, the unit displays the time 
information for dubbing by bar meter. By comparing the disc 
remaining time and the necessary time for dubbing of the selected 
items, it is possible to check if the dubbing can be performed 
completely or not.
When performing the High Speed Dubbing
When performing the Just Dubbing
The unit displays the status on the assumption that the selected 
items are dubbed in the lowest transfer rate.
The total time of a loaded disc is displayed on the right of the bar 
meter.
When performing the Manual Dubbing
The unit displays the status on the assumption that the selected 
items are dubbed in the lowest transfer rate.
The available highest transfer rate is displayed on the right of the 
bar meter.
NOTE:
The bar meter moves up and down regularly, but this is not a 
malfunction.
21%
Capacity of a disc
Remaining capacity
Dark green: Length of already recorded item
Light green: Length of selected item
Yellow: Length of the item now being selected by arrow
Red: Excess over the capacity
TOTAL   105MIN
MAX    FR240
MH50SEK_00.book  Page 61  Friday, January 14, 2005  4:44 PM