Maxtor AVE MVDR-5000 사용자 설명서

 

13

　

　

　

　

 
 

 

 

 

 

 

 

 

 

 

Please take the following steps to safely update it. 

Turn off the DVR. 

Insert the SD card into the built-in SD slot of the 

unit. 

 Hold down the Up 

 and Down 

 buttons 

simultaneously, and then turn on the unit.   

 Keep holding down the buttons until the DVR 

sounds a tone and displays the message 

“  XXXXXX  BYTES READ”. Now the DVR is 

updating the system software, which will take 

approximately 90 seconds to process. 

Restart the unit when the device sounds a tone 

twice and displays the message “PLEASE 

RESTART”. The process is complete.   

(If you have already followed the procedures 1~5, 

and the unit is still unable to switch on, please first 

check if the SD card you are using is functioning 

and the file is intact. And then start procedures 1 

~ 5 all over again.)   

 Verify the version of the system software. (Please 

refer to the section 4.6 VERSION option.)