Maxtor NVR-2028 사용자 설명서

 

31

 

 

The SD card slot of the rear unit has three functions as shown below: 

Archive Single image Clips into SD Card 

Please take the following steps to archive a critical image in a SD card. 
(1)  Insert a SD Card into the SD card slot of the rear unit. 
(2)  Start playing back the recorded video. 
(3) Press the PAUSE button 

  to freeze the desired pictures. 

(4) Press the Setup button 

  to save the image in the SD Card. 

The quantity of pictures that can be stored depends on the SD card capacity. It depends 
on SD card capacity how many pictures can be stored. You can have the saved images 
printed out in any computer. The image is stored in the JPEG compressed format. If 
more than one clip is stored in a SD card, file names will be assigned in sequence as 
shown below.   

 

 

 

 

 

The NVR offers a quick setup method by using a SD card.    If a user wants to set many NVR 
devices with the same settings, the NVR could save the whole setting in the SD card, then 
transfer it to another NVR. 

 

 

Insert a SD card into the SD card slot. 

 

Press the Setup button 

  to enter the setup mode and select the SYSTEM. 

 

Highlight SYSTEM and press the Enter button 

  to enter the SYSTEM SETTING page.   

 

Set SD SETUP to SAVE. Then the system setting info will auto save into SD card. 

 

Insert the SD card which has stored the system setting info into the NVR. 

 

Press the Setup button 

  to enter the setup mode and select the SYSTEM. 

 

Highlight SYSTEM and press the Enter button 

  to enter the SYSTEM SETTING page. 

 

Then set SD SETUP to LOAD.