Maxtor NVR-2028 사용자 설명서

 

40

 

This page allows you to set the recording rate and recording quality, and enables you to continue recording 
when the disk is full. 

 

MAX REC RATE:   

This option is used for limiting the number of pictures recorded every second into a storage disk. 

The recording rate controls the maximum of the frequency at which the number of video pictures 

can be recorded.   

There are 4 different recording rates you can select from: UNLIMIT, 30F/S, 20F/S, and 10F/S. 

 

This option determines the bandwidth to be recorded. There are seven levels of bandwidth you 

can select from: 50K, 100K, 200K, 300K, 400K, 500K,and UNLIMIT. Selecting the UNLIMIT for 

use provides bandwidth unlimited for each channel recorded images, and normally records more 

images than a 50K, 100K, 200K, 300K, 400K and 500K. To regulate bandwidth, you can use the 

“^” button 

  and the “v” button 

  to select any of the seven levels of bandwidth provided here, 

ranging from the "UNLIMIT" to the "50K". If you select any of these levels, all your channels will 

convert to that level. If, however, you wish to set individual channels in different levels of 

bandwidth, please got to “SET” for this function. After set individual channels in different modes 

and then push the Enter button 

. At once the legends "OK" and "CANCEL" appear at the 

bottom of the page. Now press the “<” button 

  and the “>” button 

  to confirm either "OK" or 

"CANCEL" respectively. Press "OK" to ratify your choice(s). If not, press "CANCEL". 

 

This option determines the way to utilize storage media in case of a full disk. 

REWRITE: When the hard-disk is full, the device continues recording by displacing the old data. 

STOP: When the hard-disk is full, the device will stop recording.