Maxtor SLD240 사용자 설명서

22 

There are 4 speeds available for a slow playback: 1/2, 1/4, 1/8, 1/16. While playing back recorded video 

at the recorded speed: 

(1)   Press the PAUSE  button 

  for the slow playback mode. 

(2)   Forward:  Turn the Shuttle  dial 

  clockwise to view the recorded video in the forward direction 

at a speed  slower than the recorded speed. Each subsequent turn of  the shuttle to the right 

increases the forward rate, as 1/2, 1/4, 1/8, and 1/16. 

(3)   Reverse:  Turn the Shuttle dial 

  counterclockwise to view the recorded video in the reverse 

direction at a speed slower  than the recorded speed. Each subsequent turn of the shuttle to the 

left increases  the reverse rate, as -1/2, -1/4, -1/8, and -1/16. 

(4)   Normal:  Release the Shuttle dial 

 and then press the  PLAY button 

 to  return to the 

normal speed of playback. 

   * You can also operate by using “<” button 

 and “>” button 

. 

 

 

While playing back recorded video at the recorded speed: 

(1)  

 Press the PAUSE button 

  for the picture-by-picture mode. 

(2)  

There are two ways, by PAUSE button or by JOG, available to play in the picture-by-picture 

mode, but the PAUSE button 

 can only function in a forward direction; the other,  JOG dial 

, can act in both a forward and a backward direction, as well as picture-by-picture. 

By  PAUSE button 

  : 

Press the PAUSE  button 

  to display one frame/field of a picture at a time in the 

forward direction. (When playing back video recorded by a multiplexer, each 

  By JOG dial 

Turn the JOG dial 

  clockwise to display one frame/field of a picture at a time in the 

forward direction.  Turn the JOG dial    counterclockwise to display one frame/field of a 

picture at a time in the backward direction. 

(3) Press the PLAY button 

 to return to the normal speed of playback. 

 

 

To play back a recorded video from HD 2, take the following steps: 

(1)   Press the Setup button 

 to enter the setup menu. 

(2)   Select DISK and press the Enter button 

to enter the DISK SETTING page. 

(3)   Set the HD2 USAGE to REC and then exit the setup menu. 

(4)   Use the search function to access desired recorded video. For specific operation details please 

refer to Section 4.4 (Search Operations ).