Maxtor SLD240 사용자 설명서

28 

 

 

The SD card slot on the front of the unit has three functions as shown below: 

Archive Single image Clips into SD Card 

Please take the following steps to archive a specific image on an SD card. 

 

1.  Insert an SD Card into the SD card slot on the front of the unit. 

2.  Start playing back the recorded video. (When playing back recorded video made by a multiplexer, you 

must get into the multiplexing mode and display picture by picture in order to select the desired image 

for archiving. Press the Monitor button 

  to get into  

the multiplexing mode so that the light of the 

Monitor button 

  is off and the pictures are switching swiftly)   

3.  Press the PAUSE button 

  to freeze the desired pictures. 

4.  Press the Enter button 

  to save the image in the SD Card. 

5.  The quantity of pictures that can be stored depends on the SD card capacity. You can have the saved 

images printed out in any computer. The image is stored in the JPEG compressed format. If more 

than one clip is stored in a SD card, file names will be assigned in sequence as shown below.   

   

 

 

 

 

   

 

 

 

The DVR offers a quick setup method by using an SD card.  If a user wants to set many DVR 
devices  with the same settings, the DVR can save all of the settings in the SD card, then transfer it to 
another DVR. 

 

??

Insert an SD card into the SD card slot. 

??

Press the Setup button 

 to enter the setup mode and select the SYSTEM . 

??

Highlight SYSTEM and press the Enter button 

  to enter the SYSTEM SETTING page.   

??

Set SD SETUP  to SAVE. Then the system setting info will auto save into SD card. 

 

??

Insert the SD card which has stored the system settings info into the DVR. 

??

Press the Setup button 

 to enter the setup mode and select the SYSTEM . 

??

Highlight SYSTEM and press the Enter button 

  to enter the SYSTEM SETTING page. 

??

Then set SD SETUP to LOAD.