Maxtor SLD240 사용자 설명서

49 

 

No hard disk detected after power activated 

Suggest change of battery and reset the system time 

System Boot up 

Video loss 

Video input source 

Key lock function is on 

Key lock function is off 

BACKUP n1/n2 NOW

 

Backup complete 

HD2 has not enough space for backup 

No backup is possible. 

Backup incomplete, since  the user  has pressed the STOP 
button to stop it 

The system cannot find a video in the Search function. 

Playback of recorded video has reached the end point 

Hard disks are full; this happens only when the DISK FULL 
item in the setup menu is set to STOP. 

The user presses the PLAY  button  or uses the SEARCH 
function, but no video can be played. 

System has to be set to NTSC, please reboot 

Software update 

The system should be rebooted after the software has 
been updated 

The user has pressed the Save key without putting in a SD 
card, or there is a disk error.  

The system finds data in installed HDs cannot be used 
contiguously. Suggest you remove HD2 from the system. 

HD2 has been attached. 

HD2 has been removed. 

The chassis fan has stopped for over 30 seconds. 

There is a hard disk error during recording, where n is the  
hard disk number and xxxxx is the hexadecimal location. 

When the user tries to clear a disk that was not attached in 
the setup menu. 

Start saving to the JPEG file. 

Save to Fnnn. JPG (where nnn= 0..999) 

Save to the JEPG is ok. 

An SD card is write-protected; or there is an error