Maxtor SC324 사용자 설명서

2. Select ”OFF”: The screen still shows         and if it’s in the record mode, the motion

detection will change the scanning sequence. 

-14-

To setup the DAY and the START/ END time for motion trigger record timer setting. 

Selecting “YES” will enable the camera title
to appear on the monitor. Selecting “NO”
will remove all titles from appearing on the
monitor.

Select the OSD (On Screen Display) color.
The options are YELLOW, GREEN, CYAN, 
BLUE, PINK, GRAY, WHITE, RED.

(MENU)

TIMER
CAMERA
RECORD
ALARM
DWELL
PIP
MOTION
DISPLAY
REMOTE
USER    
SYSTEM
EVENT 

(DISPLAY)

TITLE DISPLAY                   YES
OSD COLOR                YELLOW
LOSS SCREEN               GREEN
TIME POSITION            NORMAL

This option determines what will be shown if video is lost. 
Select RETAIN to keep the last image shown or a color to
be shown full screen. The options are: GREEN, BLACK,
BLUE and RETAIN.

To set the OSD POSITION shown on the monitor.
The options are NORMAL (Top Right) or CENTER.

Set the remote mode for connection to a computer via
the RS-232 or RS-485 port. This allows for the control of the
unit only – no viewing (Please refer to Appendix #4 and #6 for 
more information on the RS-232 & RS-485 Remote Control).

Sets the speed at which the RS-232 or RS-485 input 
and the computer communicate. Baud Rate, which is
the rate of data transmission can be set to: 115200,
57600, 19200, 9600, 4800, 3600, 2400, or 1200.   

(MENU)

TIMER
CAMERA
RECORD
ALARM
DWELL
PIP
MOTION
DISPLAY
REMOTE
USER    
SYSTEM
EVENT