Maxtor 777 W V1.0 사용자 설명서

1. POWER

Please use the provided adaptor to connect power cord (Other adaptors are not suitable for this machine).

2. EXTERNAL I/O

•

Controlled remotely by an external device or control system.

•

Alarm input, external I / O explanation.

3. 75Ω / HI

When using Loop function, please switch to HI. If you don’t use Loop function or disconnect the video
input, please set it as 75Ω.

4. VIDEO INPUT (1-16)

Connect to video source, such as camera.

5. LOOP (1-16)

Connect video signal between Input port and Loop port to make a loop.

6. AUDIO IN (1-4)

Connect to audio source, such as microphone.

•

IPS should be set to 25A (for NTSC) or 18A (for PAL)

✻ 4 audio inputs, but users can only select 1 for recording.

7. AUDIO OUT (R/L)

Connect to monitor or speaker.

•

IPS should be set to 25A (for NTSC) or 18A (for PAL

)

✻ with 2 mono audio outputs from the same source.

8. MONITOR

Connect to Main monitor.

9. CALL

Connect to CALL monitor. Show the Switch Display. When the alarm is triggered, the call monitor will show

the triggered channel for a period of time.

10.LAN

Connect Internet by LAN cable.

BACK PANEL