Panasonic ag-hpx300p 사용자 설명서

Chapter

Adjustments

and
Settings

for

Recording

Setting the Electronic Shutter

Setting the Shutter Mode and
Speed

PresstheSHUTTERswitchpositionedatOFF
towardsON.

SHUTTERswitch

PresstheSHUTTERswitchtowards[SEL].
Repeatthisswitchoveruntilthedesiredmode
orspeedappearsintheviewfinderscreen.

• If all modes and speeds are available, the display

changes in the following order:

For0iand0Precording

(1/15) (1/30) 1/60 1/100

1/250

S/S

1/120

1/500 1/1000 1/2000

For0Precording

(1/7.5) (1/15) 1/60 1/100

1/250

S/S

1/120

1/500 1/1000 1/2000

ForPrecording

(1/6) (1/12) 1/60 1/100

1/250

S/S

1/120

1/500 1/1000 1/2000

• The bracketed ( ) speeds cannot be selected

when VFR is ON.



NOTE

• In any electronic shutter mode, a slower shutter speed will

reduce camera sensitivity.

• In auto iris mode, a faster shutter speed will increase the

aperture and lower the depth of field.

• Changes in synchro scan and shutter speed settings may

cause screen flicker.

• Under fluorescent lighting and other discharge lighting

systems, horizontal stripes may appear on the screen.

Changing the shutter speed may correct this problem.

• A subject that is captured when moving quickly across the

field of view may appear distorted. This is due to the signal

read out format of the image sensor (MOS sensor) and is not

a malfunction.

• The red, blue and green dots that may appear on the screen

at low shutter speeds do not indicate a malfunction.

Viewfinder displays relating to the shutter

See [Vie wfinder Screen Status Displays] (page 65).

Placing the Camera-recorder in
SYNCHRO SCAN Mode

To place the camera-recorder in SYNCHRO SCAN mode,
follow the steps below.

PresstheSHUTTERswitchpositionedatON
towardsSEL,toplacethecamera-recorderin
SYNCHROSCAN(S/S)mode.

SHUTTERswitch

SYNCHROSCANswitch

InSYNCHROSCANmode,usetheSYNCHRO
SCANswitchtomakesteplesschangesinthe
rangebetween1/0.0sand1/.s(for0i
mode).

•HolddowntheSYNCHROSCANswitchtospeed

uptherateofshutterspeedchanges.
Ifshutterspeedchangesstopbeforethedesired
shutterspeedhasbeenreached,pressagainto
continuechangingshutterspeeds.

Range of variation in each mode

•  60P/60i mode: 1/60.0 to 1/249.8
•  30P/30PN mode: 1/30.0 to 1/249.8
•  24P/24PA/24PN mode: 1/24.0 to 1/249.8
•  When the SYNC SCAN DISP option in DISPLAY SETUP is

set to deg: 3.0d to 359.5d

• If SYSTEM MODE setting is changed, shutter speed may

also be changed.

SettingthemenuoptionSYNCSCANDISPintheDISPLAY
SETUPscreentodegprovidesaguidetosettingand
displayingshutterangle.