Manualsbrain.com
  1. 매뉴얼
  2. 브랜드
  3. Panasonic
  4. ag-hpx300p
  5. 사용자 설명서

Panasonic ag-hpx300p 사용자 설명서

다운로드
페이지 중 166
Chapter

Adjustments
and
Settings
for
Recording
GENLOCK and time code input/output connection and setup
Camera operating conditions
Camera setup
GENLOCK input and camera output phase 
(In phase:  Out of phase: ×)
Recording 
format
Video and reference 
signal to be output 
externally
GENLOCK input
GL PHASE
SDI OUT (HD)
VIDEO OUT,  
SDI OUT (SD)
TC OUT
1080i
SDI OUT (1080i)
1080i
SDI
90H delay
VIDEO OUT
COMPOSITE
90H advance
SDI OUT (1080i)
SD (480i)
SDI
90H delay
VIDEO OUT
COMPOSITE
90H advance
720P
SDI OUT (720P)
720P
SDI
120H delay
×
VIDEO OUT
COMPOSITE
120H 
advance
×
SDI OUT (720P)
SD (480i)
SDI
90H delay
VIDEO OUT
COMPOSITE
120H 
advance
480i
SDI OUT (480i)
SD (480i)
Disabled
No output
VIDEO OUT
Counter Setting and Display
Pressing the COUNTER button to view the counter displays the counter value on the time code indicator in the LCD and in 
the viewfinder. The counter value is indicated in “Hour : Minute : Second” format. The counter value is not displayed during 
playback.
The menu option REC COUNTER in the DISPLAY SETUP screen can be set to display two types of counters.
TOTAL:    provides a continuous count until reset by pressing the COUNTER RESET button. The counter value is retained 
when P2 cards are replaced and when the power is turned off.
CLIP:  
 The counter is reset to 0 at the start of each recording and allows you to keep track of clip recording time while 
shooting the current clip.
 NOTE
•  Pressing the RESET button when the counter value is displayed resets the counter to 0.
•  The counter value indicates values in the range between 0:00:00 and 9:59:59 in 1-second steps.