Panasonic ag-hpx300p 사용자 설명서

Chapter

Adjustments

and
Settings

for

Recording

The following information displays (for details, refer to 
page 67) are provided.

•BOS

Beginning of stream. No more data is available in the 
rearward playback direction.

•CANNOTPLAY

Appears when playback is disabled.
•CARDERR(1)()(1/):

The number identifies the P2 card that is giving 
trouble.

•UPDATING:Readingcarddata

•CANNOTREC

Appears when recording cannot be started by pressing 
the REC button.

•EOS

End of stream. No more data is available in the forward 
playback direction.

•PRERECON(OFF)(INVALID)

Appears when the user button to which pre-recording 
has been assigned is pressed.

•SHOTMARKON(OFF)(INVALID)

SHOT MARK appears when the user button or the lens 
RET button to which it has been assigned is pressed.

•SLOTSEL(INVALID)

Appears when pressing the user button to which SLOT 
SEL is assigned.

•TEXTMEMO(INVALID)

TEXT MEMO appears when the user button or the lens 
RET button to which it has been assigned is pressed.

Errors and warnings appear when something goes wrong 
with the camera or a P2 card malfunctions. If the problem 
cannot be solved by turning off the camera and turning it 
back on, try replacing the card and if that does not help, it 
may be necessary to consult your supplier.
•1

This error occurs in a 1394 connection or when signal 
faults occur.
• 1394 INITIAL ERROR: a connection error
• 1394 INPUT ERROR: an input error
• 1394 INPUT ERROR (OTHER FORMAT): 
 

(different input format)

• COPY INHIBITED: 
 

This indicates that a copy-guarded signal 
entered DV format input from the DVCPRO/
DV connector.

•DIRENTRYNGCARD

This message indicates that the directory on the card 
has become corrupted and that normal recording 
cannot be guaranteed if operation continues. Make a 
quick backup of card data and reformat the card.

•EXTERNAL1DISCONNECT

This message appears when the menu option 1394 
CONTROL in the OTHER FUNCTIONS screen is set to 
EXT and recording is attempted without connecting an 
external device to the DVCPRO/DV connector.

•FORMATERR!

This indicates a P2 card that does not meet the P2 card 
standard

•INCOMPATIBLECARD

This message indicates that the inserted card does not 
meet required standards and cannot be used.
It may also appear when a proxy card is inserted when 
the power is on.

•LOWBATTERY

This message indicates that the battery is depleted.

•RECWARNING

This is displayed during a recording error. Do the 
recording over. If this does not solve the problem, 
consult your supplier.
•  CARD ERR (1) (2) (1/2): The number indicates the P2 

card that is giving trouble.

•  Turn the power off if the warning continues.
•  If the warning persists after rerecording, replace 

the card with another card.

• ERROR: Other causes (This indicates that an attempt 

was made to record 1000 or more clips on 
one card, for example.)

•  PULL DOWN ERROR: Video pull-down sequence 

error in a mode such as 24P

•  REC RAM OVERFLOW: Overflow of recording memory

•RUNDOWNCARD

This message indicates that a P2 card has been 
overwritten the maximum number of times and that 
normal recording cannot be guaranteed if operation 
continues.
It is best to replace such P2 cards with a new card.

•SYSTEMERROR

This message indicates that a system error has 
occurred.  This type of error can often be corrected by 
turning off the power and turning it back on again.
•  CAM MICON ERROR: The microprocessor in the 

camera is not responding.

•  P2 CONTROL ERROR: a P2 control error has 

occurred.

•  P2 MICON ERROR: The P2 microprocessor does not 

respond

•TEMPORARYPAUSE

IRREGULARFRMSIG:

This message indicates that input GENLOCK 
reference signal is irregular and that recording 
has been terminated.

•TURNPOWEROFF

This message indicates that an abnormal event has 
occurred, for example, that a card was removed during 
access or that a system mode change was made.
Turn the power off and then turn it back on again.

•WIRELESSRF

This message indicates that reception from the wireless 
receiver is poor.