Maxtor SSA-0412 사용자 설명서

Change the contrast value for the specified channel 

Change the hue value for the specified channel 

Change the saturation value for the specified channel 

 

 

Set the values for recording video. Navigate through menu items by pressing the UP/DOWN buttons. User 

can change the value of the menu item by pressing the LEFT/RIGHT buttons. 

   

 

Table 3.3.1. Menu items in RECORD mode setup 

Set resolution to either full or quad. 

Select the channel for applying the following settings. 

Set the frame rate for the specified channel. The sum of the frame rate values 

from each channel cannot exceed maximum frame rates for a particular 

recording resolution. Typical values of the maximum frame rate for NTSC 

fps for FULL (704*480(NTSC)/704*576(PAL)). 

Select the recording quality for the specified channel from LOW, NORMAL 

and HIGH 

Assign the recording mode for each channel. Recording modes: Continuous, 

Motion, Sensor, Schedule and Disable.   

Select Full Zone or Partial Zone for motion sensing. If the Partial Zone is 

selected, screen will be change as shown in figure 3.3.2.