Maxtor SSA-0412 사용자 설명서

Subnet Mask: Register Subnet Mask that is assigned for DVR. 

Enable/disable using domain name address through DDNS server. 

“ON” mode, DDNS server name appears for domain registration. 

The DDNS sever name is ns.standalone4ch.com. 

CAUTION: Do not change this sever name. If this is changed, the DDNS 

service cannot be used. 

Check the MAC address of DVR from Setup>System>Description. 

Please contact a distributor or an installer to register your DVR on a DDNS 

Server. Register the domain name on DDNS Server. 

After the domain name and MAC address of the DVR are registered on a 

DDNS server, user can access the network with their own domain name. 

 

3-8-1. Ports 

When you connect one or more DVRs to a network through an IP sharing device, each device must have a 

unique TCP port number for access to each unit from outside the LAN. Also, the IP sharing device must be 

configured for port forwarding so when each port is accessed on the IP sharing device, it will forward to the 

appropriate DVR.   

Note:  This port number is listed next to the Port menu option in the Network Setup screen. If you plan to 

access the DVR units only from within the same LAN, the TCP port does not have to be changed. 

 

 

 

 

 

 

 

In order to access the DVR remotely beyond a router (firewall), the user must open one TCP port for 

command level, live channels and storage channels. If this port is not opened properly, user can not 

access DVR beyond a router. 

If the DVR port number is set to 5445, open the TCP port 5445 on the router.