Maxtor SSA-0412 사용자 설명서

 

To operate the PTZF functions, connect the controller to the RS-485 port on the rear panel. (figure 4.3.2) 

In the PTZ control setting in the SETUP menu (refer to the figure 3.4.5 on page 26), user can select or 

set the protocol type of the camera which is the same as the one that is installed on the site. If the 

camera has a specific camera ID, select the camera ID using Left or Right button.   

The PTZ function button is found on the front panel. Once you press the PTZ button, the screen will 

appear as in figure 4.3.1. Highlight the item to select and control the cameras by using the UP and 

DOWN or LEFT and RIGHT buttons. Please refer to the table 4.3.1. for description.