Swann DVR4-1100 사용자 설명서

 

- 8 - 

 

There are three levels of recording quality: High, Normal, and Low. 

Higher quality uses more hard drive space. 

Record frame rate, record quality and available hard drive space will affect the 

total recording time of the DVR system. 

 

 

You can set video recording method by Time and Motion Detection Triggered 

Recording. 

 
For example: 

If you want to record by motion detecton during 3 to 6 o’clock, please set the 

time points (3, 4, 5, 6) from to be “M”; if you want to continuous record during 7 to 

12 o’clock, please set the time points (7, 8, 9, 10, 11, 12) to be “T”. 

Both of the two record methods need to be triggered by pressing [ REC] 

button. After pressing [ REC] button, if the schedule is set to be “T” at that time, 

DVR will start to record immediately; if the schedule is set to be “M”, DVR will 

not start record until a motion is captured and detected by system.

When DVR is set to record by motion detection, DVR will not record if there is 

no motion. If you want to record immediately, please press [ REC] button and hold 

for 3 to 5 seconds, DVR will start force record. 

 

 

 

 

“-” No Recording 

“T” Time (System Default) 

“M” Motion Detection Triggered 

[ Up] and [ Down]: To move the cursor    

[ SEL]: To modify record method 

Numbers along bottom indicate the 24 

hours of a day