Swann DVR4-1100 사용자 설명서

 

- 11 - 

 
 
 
 
 

MOTION SET:  

AREA SET:   

Use [ Up] and [ Down] button to select the channel you want to modify, press 

[ SEL] button to enter the sensitive area of each camera. The picture of the 

selected channel is divided into 144(12*12) blocks, press [REW] to move left, 

press [FWD] to move right, press[ Up] and [ Down] to move the cursor up and 

down, press [ SEL] to set the block active or not.   

When the block is transparent, it’s active to record. When the block is covered 

by shadow, it is not active, and motion in this area will NOT be detected. 

Make sure Record Schedule is set to Motion for the times required. 

 
 
 

Select NTSC or PAL video system. 

Use [ Up] and [ Down] button to 

select the channel you want to modify, 

press [ SEL] to adjust sensitivity of 

motion detection on each channel. 

When it’s “OFF”, the channel cannot 

be triggered by motion.