Swann SW242-6T4 사용자 설명서
Digital Video Recorder User Manual
58
Fig4.17 PTZ Configuration
1. Channel
When you need to set PTZ control, you should enter the PTZ configuration window and click the corresponding channel.
Then users can begin to control the PTZ through enabled channel.
When you need to set PTZ control, you should enter the PTZ configuration window and click the corresponding channel.
Then users can begin to control the PTZ through enabled channel.
2. Baud
Rate
It sets the Baud Rate of PTZ device. The default value is 9600.
3. Protocol
It sets the communication protocol of PTZ device.
It sets the communication protocol of PTZ device.
4. Address
It sets the communication address of PTZ device.
It sets the communication address of PTZ device.
Notice: Baudrate and protocol should be found in PTZ camera user manual.