Swann SW243-8N8 사용자 설명서

8-Channel Digital Video Recorder 

 

If one channel here set OFF, this channel will not transmit to the network, so if you want to 

see a channel from network, you must to set this channel ON. 

When the cursor moves to Mac Set then press the Enter button, the Mac Set window will appear. 

 

If you have more than one DVR in a local area network, you have to set each DVR to have an 

exclusive MAC address, but remember that you have only one chance to modify the MAC 
address, once you have changed the MAC address, this menu will not appear again. If you want 

to change the MAC address again, please load the factory set, then you can change the MAC 

address. For MAC address, you’d better set the first two bytes to “00 00”, and change other bytes. 

When the cursor moves to Sensor Set, then press the Enter button, the sensor setup window will 

appear. Press UP or DOWN button to move the cursor. Press LEFT or RIGHT to change the value. 

 

12