Swann SW244-DAO 사용자 설명서

 

] 

 

There are three levels of recording quality: High, Normal, and Low. 

Higher quality records the best images but uses more hard drive space. 

Record frame rate, record quality and available hard drive space will affect the 

total recording time of the DVR system. 

 

 

You can preset video recording modes by Time and Motion Detection 

Recording. 

- 8 - 

 
For example: 

If you want to record by motion detecton during 3 to 6 o’clock, set the time 

points (3, 4, 5) to “M”; if you want to continuous record from 7 to 12 o’clock, set 

the time points (7, 8, 9, 10, 11) to “T”. 

Both of the recording methods need to be triggered by pressing the [ REC] 

button. After pressing [ REC] button, if the schedule is set to “T” at that time, the 

DVR will start to record immediately; if the schedule is set to be “M”, the DVR will 

not record until motion (movement) is detected by system.

   

Numbers along bottom indicate the 24 

hours of a day

 

[ SEL]: To modify record method 

[ Up] and [ Down]: To move the cursor    

“M” Motion Detection Record 

“T” Time (or manual recording: Default) 

“-” No Recording 

 

 

PRESS (UP，DOWN),  ENTER (SELECT)  

 

 

Force Record： 

When the DVR is set to record by motion detection, the DVR will not record if 

there is no motion. If you want to record immediately, please press and hold [ REC

button for 3 to 5 seconds to begin manual recording.