Tunturi C20 사용자 설명서

on.warranty.terms.can.be.found.in.

the.warranty.booklet.included.with.the.

product.

•.Do.not.attempt.any.servicing.or.

adjustments.other.than.those.described.

in.this.guide..Everything.else.must.

be.left.to.someone.familiar.with.the.

maintenance.of.electromechanical.

equipments.and.authorised.under.the.

laws.of.the.country.in.question.to.carry.
out.maintenance.and.repair.work.

Your choice shows that you really want to invest in 

your well being and condition; it also shows you 

really value high quality and style. With Tunturi 

Fitness Equipment, you’ve chosen a high quality, 

safe and motivating product as your training 

partner. Whatever your goal in training, we are 

certain this is the training equipment to get you 

there. You’ll find information about using your 

exercise equipment and what makes for efficient 

training at Tunturi’s website at 

WWW.TUNTURI.COM.

Start by unpacking the equipment. Two people are 

needed for the assembly. Check that you have the 

following parts:

1. Frame

2. Front support

3. Rear support

4. Front frame tube

5. Arms (2)

6. Footrests (2)

7. Meter

8. Handlebar

9. Shaft

10. Transformer

11. Assembly kit (contents marked with * in the 

spare part list): keep the assembly tools, as you may 

need them e.g. for adjusting the equipment 

If necessary, please contact your dealer with the 

model, equipment serial no. and spare part no. 

of the missing part. You’ll find a spare part list at 

the back of this guide. The packaging includes a 

silicate bag for absorbing moisture during storage 

and transportation. Please dispose of the bag once 

you have unpacked the equipment. The directions 

left, right, front and back are defined as seen from 

the exercising position. Allow at least 100 cm of 

clearance around the equipment.

Push the stand feet to the rear support ends and 

attach the rear support to the main frame with two 

bolts, washers and locking sleeves.

Attach the front support with transportation 

wheels to the main frame with two bolts, washers 

and locking sleeves.

Attach the footrests to the position of your choice 

on the pedal shafts with two screws, two washers / 

screw and locking nuts.

Remove the rubber band from around meter cable 

coming from the frame tube.

Attach the meter cable to the connector coming 

from the front frame tube. Push the front frame 

tube inside the frame tube: do not damage the 

meter cable! Attach the front frame tube tight to 

the frame with the washers and attachment screws.