Motorola HDDSR 605 사용자 설명서

다운로드
페이지 45
 
VIDEO SETTINGS 
After connecting your satellite receiver, taking a moment to optimize your video settings will 
ensure the best viewing experience.  Press 
OPTIONS on your remote control, then enter the 
numbers 
4, 5.  The following 
Video Settings
 options will be available: 
• 
OUTPUT FORMAT:
 This determines the primary resolution that is used to send video to your 
TV.  On most HDTVs, 1080i is optimal.  For SDTVs, use 480i.   
• 
4X3 OVERRIDE:
  Turning this on will “override” the primary output format when tuned to 
standard definition stations.  Turning on the override allows most TVs to automatically 
stretch SD content to fill the whole screen.  If you’d prefer to control this yourself using 
the 
ASPECT button, leave it Off. 
• 
TV TYPE:
 This option specifies what type of TV you have.  Widescreen TVs are 16x9 (such 
as most HDTVs); traditional square TVs (such as most SDTVs) are 4x3.  Select whichever 
is applicable to you.   
On a regular HDTV, recommended settings are 1080i, 480i, and 16x9 and will normally result in 
standard definition channels automatically “stretched” by your TV to fit the screen. 
On an SDTV, recommended settings are 480i, Off, and 4x3 Letterbox.   
Select “SAVE” and press 
ENTER after changing the settings and EXIT to return to live TV.  
 
If you select an output format that is not supported by your TV, video may be 
lost.  If this occurs, press EXIT, OPTIONS, 4, 5, and then 6 repeatedly until 
video returns.  The selected output format will be displayed on the Front Panel 
of the receiver with each change. 
 
You can use the 
ASPECT or button while watching any program or recording 
to Stretch (“str”) or Zoom (“zoo”) the picture.  You can return the aspect to 
Normal (“nor”) when the program has finished.  The current aspect mode is 
shown on the front panel of your receiver each time you press the button.